Tag Archives: solids control equipment

Maintenance of GN vertical cuttings dryer for WBM and also OBM(

GN vertical cuttings dryer can be used for equally water based mud and also oil based mud/ or BINQ. The maintenance cost is one of the priority for mud service company or even waste service company, they are all buying a cost effect dryer for that drilling waste management weighed against US brand cuttings dryer or ship the spend to drilling waste management companies.
The main spare parts regarding vertical cuttings dryer tend to be as below, most of the servicing cost is from these kind of spare parts:
(1) Screen basket, the particular screen basket and screen frame are separated ingredients and they are balanced separately. Typically the screen basket scraper is usually installed to prevent the dismissed fluids from blocked around the screens, sometimes the solids content is very high, it can be difficult to get down from the window screens. Based on different drilling cuttings conditions, the replacement period of time will be different for the screens, could you check with GN sales electrical engineer team for the required volume in one year.

(2) Flites and also Cone Rotor Assembly, the actual 8 flites are permanent on the rotor assembly, it is advisable to replace it completely. The travel arrangements are used to prevent cuttings hindering the screens and scraping the mud inside the monitors.
(3) Bearings replace time depending on actual working time.
(4) Bell jar with scraper, the particular scrapers are used for solids relieve scraping.
(5) Liquid discharge wedding ring, it is not easy to be damaged commonly, 1 set is required since back up.
With flushing pump and air knife to offer pressurized cleaning, that is why GN cuttings dryer can be used with regard to both WBM and OBM. We have 2 units associated with vertical cuttings dryer stored in Houston warehouse, 6710 windfern road, Houston, TEXAS 77040, USA. Welcome to look at our cuttings dryer in your Houston office to know more information from our sales team.

happy new year 2016

Leave a reply

As the New Year 2016 is coming, GN Solids Control would like to say Happy Start of the year to you all. Hope most GN friends in the start of the year will have a happy family and a great heath.
With the New Year 2016 arriving, GN Solids Control is another one year older. GN has growing from a small corporation to a modern factory which often as many certificates such as API, HSE, DNV etc, these cannot be completed without the fantastic help and support through GN friends. We’d want to give our since because of you all.
In the past 2015, GN Solids Control retained a fast growth although the acrylic price is sharply cut down from top 130 usd/barrel in order to 35 usd/barrel. GN Solids Control equipments and drilling cuttings management systems get to be the first choice for many large coal and oil clients as they are trying to slice the cost. GN solids control equipments has won quite a few large projects when concluding with world famous leading firms. GN shakers, decanter centrifuges and cuttings dryers are actually proven to be the best quality products together with good separating performance even though the price is pretty competitive.

GN Solids Control now has 2 branch companies: GN Solids America LLC which is situated in Houston Texas and GN Solids Russian in Moscow, Russia. With the fast improvement, GN Solids Control can open another warehouse throughout Middle East. GN also offers some partners working in around 60 countries to provide tech support team and after sales service regarding GN.
GN Solids America LLC is registered with 2013, and started the real business in 2014. Although GN Solids America LLC is still a fresh firm in North America, using the large support from GN Solids Control, now GN Solids America has a substantial warehouse, which can stock equipment including vertical cuttings dryer , shale shaker , shear conveyor , shear pump , oilfield shale shaker , mud cleaner , desander and desilter , vacuum degasser , Mud Gas Separator , decanter centrifuge , mud tank , mud agitator , etc . Each of the spare parts for those equipments may also be in Houston warehouse intended for fast delivery.

GN Solids Control Engineers Commissioning in North Africa

Leave a reply

GN Solids Control Engineers Commissioning in North Africa
Although the oil and gas market would make many oil and gas relating firms to feel sad during the past season by the low price of the unsavory oil, there are still chances for your good companies. Like GN Solids Control, their consumers are still buying. The going companies in Africa continue to be looking forward to a brighter foreseeable future to come by fully prepared to get equipments and staff.
This time around, GN Solids Control dispatched engineers to a North Africa equipment company on request of the clientele to do the commissioning of just one set of mud plant in addition to 4 sets of waste material management systems.
This is a big drilling company in Cameras which provides solids control as well as waste management systems as well as services to the oil businesses who have oil fields inside Africa. They employ employees from local Africa although importing equipments from worldwide. Before, they bought products from USA only, however in case of the low acrylic price, in order to get a crammed benefit to be larger, that they choose to find suppliers supply by china manufacturer, and they visited all principal Chinese rig manufacturers and also solids control manufacturers and lastly decide to buy from GN Solids Control.

Because:
1 . GN is most well known solids control manufacturer in China plus 1st API certified throughout China.
2 . besides API certifications, GN also got ISO, DNV CE, HSE in addition to etc certificates, showing the duty of the company to the community and environment.
3. GN Solids Control equipment quality is equivalent to the usa and Europe suppliers, within word, from GN, they will buy at a better cost than US or Eu suppliers but the quality is usually equivalent.
4. Reassured right after sale service and repalcement parts, for main equipment and also systems, GN send technical engineers for first time commissioning along with training for end user’s workers for free for 1 week.
About spare parts, GN always have essential spare parts in stock with regard to quick delivery.
That’s the reason why more and more drilling companies along with oil service companies are deciding on to cooperate with GN Solids Control.

Quantity of Shale Shaker Screen to Middle East

Leave a reply

Shaker screen is wearing elements of shale shaker, and the consumer need to replace it frequently according to drilling speed and going conditions. To serve far better of our client, GN Solids Control start the design in addition to manufacture of shaker screen from the foundation of company. You can offer GN model shaker screen, and also we can offer you replacement shaker screen usually brand shale shakers, like. replacement screen for Derrick shaker, replacement screen to get Swaco Mongoose shaker, substitute screen for NOV brandt king cobra shaker. In accordance with the jobsite feedback, our replacing screen is accepted nicely with jobsite engineers, life span and performance is similar to original company shaker screens.

Recently, we all export one large quantity connected with replacement screen for Swaco Mongoose shaker to Center East. The client is GN VIP client; they get same quantity of screens not too long ago, and repeat order as soon as they know the good performance through drilling site acceptance. The customer came to GN factory regarding shaker screen inspection; they are really very satisfied with the shaker screen quality, appearance, bundles, etc . shipping status.

Apart from replacement screen for Mongoose shaker screen, the client in addition show keen interest in GN decanter centrifuge. “In our country drilling internet site, most of brand are YOU brand like Swaco centrifuge, Derrick centrifuge, but I actually happen to see GN company centrifuge once. And the overall performance is OK; After the screen order, we will bid considerably more tenders and will put considerably more manpower and energy about centrifuge rental / centrifuge service project”. In the conference, we show our decanter centrifuge project list with past years, as well as our own centrifuge working video together with mud in rigsite. Your client is very impressed with GN high quality decanter centrifuges.

GN Solids Control is primary solids control equipment provider from China. Our product normal is same as US/Europe model product, the price is much better. Contrary to other China brand, most of us target on high end product or service and only produce high quality products with longer lifetime and good working performance. Most of us don’t waste time to produce decrease quality product with more affordable price to mislead customer.

Solids control equipemnts for Hongkong client

Leave a reply

Recently GN solids control shipped 2 shale shakers and 2 mud cleaner units for Hongkong clients, area is customized silver off white color which is different with normal green color, we can easily provide customized color, style, brand and nameplate to get client’s special requirement.
The particular desander cone, desilter cone and bottom shale shaker combination as mud cleaner, compared with single desander, desilter, the mud cleaner using bottom shaker which can obtain useful drilling fluids and prepare the discharged solids ground, and the footprint is scaled-down. Sometimes when shale shaker is not working, it can be likewise used as back up shaker.

With different quantity desander cone and desilter cone, the particular mud cleaner has several treating capacity, 1S8N having 1 of 10 in . desander cone with eight of 4 inch desialter cone, the treating ability is 500gpm, 2S12N using 2 @ 10 half inch desander cones and twelve @ 4 inch desilter cone with treating capability about 1000gpm, 3S16N together with 3 @ 10 half inch cone(sometimes with 2 connected with 12 inch desander cone) and 16pcs of some inch desilter cone, the particular treating capacity is 1500gpm. The Hongkong client ordered 2 units of 1500gpm capacity mud cleaner having 3 desander cone, sixteen desilter cones.
The shale shaker and mud cleaner bottom shaker are the same type, and use the same dimensions shaker screens, so the customers do not have to make different dimension screens for inventory. Each of our most sold shale shaker models including GNZS703 and GNZS594, the former model together with 3 panels screens regarding size 700x1250mm, the other model with 4 solar panels screens of size 585x1165mm.
Right now we have several sections of GNZS594E-HB shale shaker and mud cleaners with stock of Houston part, welcome to visit GN solids America. With the US Charlie brand vibration motor, high-quality and reliable performance is actually assured.

GN Decanter Centrifuge and Cuttings Dryer Stock for sale.

5 Replies

GN Solids America LLC is a Houston side company of GN Solids Control. With the fully assistance from its parent firm, GN Solids America LLC is widely known by To the north America and South America customers.
GN Solids Control is located in Langfang, which is merely 40km from Beijing air port. Now GN Solids Control has 2 branch corporations: one is GN Solids America in Houston, the other is usually GN Solids Russia with Moscow. With the fast marketplace expanding, GN is going to determine another branch company with Middle East. In the next calendar year, the Middle East Company are going to be put into use. And the No . two factory near Beijing may also start to manufacture decanter centrifuges and shale shaker screens. For your American customers who likewise have business in Africa and also Middle East, GN can offer short lead time for several solids control and punch cuttings management systems.
As a way to meet customers’ demands for a short lead time, GN Solids America LLC possesses storaged many shale shakers, decanter centrifuges, cuttings washer dryer combos as well as many spare parts throughout Houston warehouse. GN skilled engineers in Houston may be also sent out for soon after sales service and difficulty shooting.

2015.12.02 vertical cuttings dryer
In GN Beijing headquarter, many decanter centrifuges and cuttings dryers are manufactured for urgent orders placed.
1 . GN decanter centrifuge
GN decanter centrifuges usually are widely used in over 70 countries for solids control and drill cuttings management. There are 9inch, 14inch, 18inch and 22inch decanter centrifuge if you divide them by diameter of rotating serving.
When running at various speed, GN centrifuge can be employed for different usage. Lets’ get GNLW363 centrifuge (14inch) for instance:
a. 2200RPM is suggest to recovery barite;
c. 2700RPM is recommend to minimize mud weight;
c. 3200RPM is recommend to drill down cuttings management.
2 . GN cuttings dryer
GN cuttings dryer is especially designed to different the OBM, WBM or even SBM. Many large internet businesses are using GN cuttings washer dryer combos for drill cuttings separating, such as Shell, Baker Gaines.
Welcome to visit GN Solids America warehouse or GN Beijing factory. GN machines are always available for urgent requirements.

GN Solids Control Equipments are available in America

Leave a reply

Because the leading Solids Control along with Drilling Waste Management maker in China, Hebei GN Solids Control Co., Limited established the first USA side company in Houston, TEXAS in 2013. With these two many years fast development, GN Solids America LLC is getting to help known by more and more Upper America and South America oil and gas companies, HDD organizations, Waste Water Treatment businesses.

America solids control equipment
GN Solids America LLC has a large warehouse get to to 30, 000 sq. feet. GN Solids America helps to keep many sets of shale shaker, desliters, desanders, decanter centrifuges, cuttings dryers and a few other spare parts in Freeport warehouse, all of these equipments is usually arranged for delivery in rapid sequence. GN also sends encountered engineers to customer’s worksite for after sales services and trouble shooting.
1. GN shale shaker as well as drying shaker
Shale shaker and drying shaker (also called Hi-G shaker) bring solids separation. Dry shakers are also widely used for normal water base mud separation, they can be effectively to dry the mud.
2 . GN desander as well as desilter
GN desander (8 inch cyclones) and desilter (4 inch cyclones) would be the finer phase separation accessories, they can separate solids in which larger than 20 microns.
three or more. GN decanter centrifuge

GN Solids Control Houston
Numerous sets of decanter centrifuges are available in Houston. GN Solids America is providing rental services for these centrifuges and the some other solids control and going waste management systems. Different kinds are optional from varying speed to fix speed. At the first of this year, one of the largest essential oil service companies purchased around 30 sets decanter centrifuges from GN.
4. GN cuttings dryer
GN cuttings dryers are widely used in numerous oil and gas worksite for OBM, WBM and SBM spliting up.
Many large clients worldwide are using GN mud methods and waste management techniques to treat different solids. At this point Baker Hughes, Shell, Halliburton, CNPC etc are using GN equipments for the various acrylic sludge treatment. GN mud mixing systems are also widely used throughout HDD, TBM, CBM spot.

Big Bowl Decanter Centrifuges in Australian Market

Leave a reply

Big bowl decanter centrifuges are getting more and more popular all over the world, Australia, always stay tune on the advanced technology, also a lot of people are interested in the big bowl centrifuge, though the market in down and not everyone have good time these days.

We recently sent two sets of big bowl centrifuges to Australia GNLW553CG.

Main features as below:

VFD control panel to achieve stepless bowl speed adjustment to enhance mud treatment performance
Duplex stainless steel SS2205 by centrifuge casting to improve bowl balance,also get better performance on corrosion resistance.
Tungsten carbide tiles protecting the screw conveyor
90kw for centrifuge main drive motor and match 37kw centrifuge back drive motor. Back drive motor connected with 35:1 planetary gearbox to generate industry leading differential speed.

Though different people have different taste on the centrifuge options, big bowl have made a lot of obvious advantages, such as big volume, comparing a series small ones, it takes less space, and saves money, operation cost also getting lower.

As time goes by, not only compact mud system, solids control or drilling waste management equipment will also eventually accepted by more and more Australian client.

GN Solids Control Equipment for India

Leave a reply

India & China are good friends’ country and we interchange our advantages. China is a good market for India software; Vice versa, India is a big market for solids control equipment & mud system for China. As China & USA based leading manufacture for solids control equipment, GN export lots of equipment to India in the past years.

In year of 2009, GN export one sets ZJ70 oil drilling rig mud system to India. The system configuration including:

1) 4 set 40ft mud tanks. 1 set mud tank for recycling tank, 1 set mud tank for mixing tank, 2 sets mud tank for mud storage tanks.

2) 1 sets shale shaker & 1 set vacuum degasser mounted on mud recycling tank.

3) 1 set mud cleaner & 1 set centrifuge mounted on mud mixing tank

4) Other mud tanks with mud agitators, mud guns, mud hoppers, centrifugal pumps etc.

In year of 2009, GN export one set ZJ20 drilling rig mud system to India. This is two mud tank system with two sets shale shaker, 1 sets mud cleaner.

In year of 2012, GN export 500gpm HDD mud system to India

The 500 GPM mud system is the 8th set complete mud cleaning unit we sold to India,GN has ever delivered one1500HP mud system,two 750 HP mud tank system,and three 800 GPM mud tank system,and one 500GPM mud tank system to India for the drilling industry.India is fast developing country for construction and CBM exploration as well as oil gas drilling.

In year of 2012, GN export Hydraulic jackup mud system to India. It is for CBM drilling. The system including 1 set shale shaker & 1 set mud cleaner & 3 sets centrifugal pump & 1 mixing hopper & 1 agitator

In year of 2015, GN export 2 sets GNLW363CG-VFD centrifuge to India Company for solids control service application.

For more info, pls contact us- GN Solids Control.

GN Economic Mud Recycling Unit

Leave a reply

Most of the drilling project will need a drilling mud recycling unit to reduce the drilling cost and promote the drilling process. In normal oil and gas drilling project, always the usage of the drilling fluids is very large that need several mud tanks to store the drilling mud. Different from this type drilling, there are several other drilling projects that no need a large drilling mud volume. The footprint and cost are the key factors the contractor will consider.

As a leading drilling fluids recycling equipment manufacturer and supplier, GN solids control also has a good reputation in the HDD and piling market. This type drilling project need compact structure and cost economic mud recycling unit.

GN has a self-contained drilling mud system designed especially for HDD project. As per the flow capacity, the mud system design is classified into 200GPM, 350GPM, 500GPM, 800GPM, 1000GPM and 1500GPM. Most of the design only has one skid with all primary solids control equipment installed on one tank. According to the mud storage capacity requirement, additional storage tanks may be needed. Some users request decanter centrifuge for fine solids separation. Always this type mud system has all mud recycling equipment, transferring pump and mud mixing equipment. Comparing with oil drilling mud system, the HDD mud system has smaller footprint and the cost is less.

For some drilling project like the piling process or TBM drilling, the separation of drilling mud is not so strict. The contractors only need a de-sanding unit to remove the large size solids in the drilling mud. GN’s this type de-sanding unit includes shaker unit and de-sander cyclone installed on over the shaker. This separation unit can process 2 stages solids control. Under the shaker, a catching tank can used to temporally store the active drilling mud; it also has a transferring pump to pump the mud to drilling rig or to storage tank. The contractor can use other type storage tank to connect with this de-sanding unit and get a skid mounted jet mud mixing unit to compose a drilling mud recycling system that has larger mud storage capacity and mud mixing function.

If you need a drilling mud separation system for small drilling project, please don’t hesitate to contact with GN solids control for a quote and design.