GN vertical cuttings dryer can be used for equally water based mud and also oil based mud/ or BINQ. The maintenance cost is one of the priority for mud service company or even waste service company, they are all buying a cost effect dryer for that drilling waste management weighed against US brand cuttings dryer or ship the spend to drilling waste management companies.
The main spare parts regarding vertical cuttings dryer tend to be as below, most of the servicing cost is from these kind of spare parts:
(1) Screen basket, the particular screen basket and screen frame are separated ingredients and they are balanced separately. Typically the screen basket scraper is usually installed to prevent the dismissed fluids from blocked around the screens, sometimes the solids content is very high, it can be difficult to get down from the window screens. Based on different drilling cuttings conditions, the replacement period of time will be different for the screens, could you check with GN sales electrical engineer team for the required volume in one year.

(2) Flites and also Cone Rotor Assembly, the actual 8 flites are permanent on the rotor assembly, it is advisable to replace it completely. The travel arrangements are used to prevent cuttings hindering the screens and scraping the mud inside the monitors.
(3) Bearings replace time depending on actual working time.
(4) Bell jar with scraper, the particular scrapers are used for solids relieve scraping.
(5) Liquid discharge wedding ring, it is not easy to be damaged commonly, 1 set is required since back up.
With flushing pump and air knife to offer pressurized cleaning, that is why GN cuttings dryer can be used with regard to both WBM and OBM. We have 2 units associated with vertical cuttings dryer stored in Houston warehouse, 6710 windfern road, Houston, TEXAS 77040, USA. Welcome to look at our cuttings dryer in your Houston office to know more information from our sales team.