Tag Archives: Decanter Centrifuge

GN Waste treatment system for Water base mud and water base cuttings

World top manufacturer GN Solids Control offers complete solution associated with water base mud as well as water base drilling cuttings, as well as oil base mud and oil base cuttings. Water base mud is a very normal type drilling mud for oil and gas drilling, particularly in China. Here we have a short introduction of the treatment system to get water base mud in addition to water base cuttings.
GN Solids Control system may recovery drilling mud while more as better, and lessen amount of solids waste as little as better. After the GN system treatment, the fluids can easily clean enough for recycle for discharge. The solids phase is harmless along with dry; it can be used to help make bricks or other purposes.

GN no pit drilling waste management system intended for water base mud as well as water base cuttings tend to be welcomed in China and outdoors of China. Like CNPC, CNOOC and SINOPEC are generally equipped with GN brand drilling waste management.
The equipment with regard to water base mud in addition to water base cuttings usually are as following:
1) Excessive G drying shaker. It might be called High G dryer, or drilling cuttings dryer. The Qty is only two ea for 1 system. Model GNZS594HGE-LD. The shaker model is the 5 creation high G dryer shaker from GN Solids Control. GN own over ten ea patent design for the main line equipment.
2) High speed decanter centrifuge GNLW363C-VFD. It is the most advanced design centrifuge for waste management supply by china manufacturer. It replaced many United. S brand at several jobsite with its mature design and style and reliable performance.
3) Chemical dosing system along with dewatering centrifuge: If the clear fluids from the high speed centrifuge will not be reused for drilling, it will be transferred to chemical dosage system (or called dewatering unit) for further treatment. An excellent step the fluids is definitely clean and can be discharged.
4) Drill cuttings solidification product. It is used to treat all of the solids phase discharged by high G dryer shaker, from high speed decanter centrifuge and from the dewatering centrifuge. After the treatment of solidification system, the solids can be used to help make bricks for road structure.

GN Decanter Centrifuge Delivered To Africa

1 Reply

GN Solids Control is a well known manufacturer who can provide decanter centrifuge and cuttings dryer. Many other solids control equipments are also manufactured such as various shaker screens for Derrick 500, Derrick 200, NOV King Cobra or VSM 300 screens. GN Solids America Houston warehouse has many screens in stock which help to provide a much better lead time.
Recently, GN Solids Control just provided one set of decanter centrifuge to Africa. GN centrifuges have been widely used for solids separation and drill cuttings management. This decanter centrifuge is delivered to Nigeria for oil and gas cuttings separation. Although the oil price is very low at this time, Nigeria is keeping drilling and many worksites are even much busier than before.

gn centrifuge for waste cutting management
GN has provided over thirty sets decanter centrifuges to the Nigeria market. Every year, GN also manufactures over 300 to 350 sets decanter centrifuges. GN got this order from a regular client, who has been using GN shakers, centrifugal pumps as well as some other solids control equipments for many years. They will use this GN decanter centrifuge to match their cuttings dryer which is also purchased from GN Solids Control.
For those cuttings separated from GN cuttings dryer, the particles are less than 250 microns are still in the slurry. While the solids that larger than 250 microns can be separated out in the form of solids or cuttings. So for the smaller solids, GN decanter centrifuge can separate them out, diameter that larger than 2 to 5 microns will separate out by GN centrifuge under the rotating speed of 3200 RPM.
GN provides VFD centrifuge and fix speed centrifuge to meet various usage. All these centrifuges are explosion-proof. Now GN Solids America LLC also provides CSA certified or UL certified decanter centrifuges as well as cuttings dryers and shakers.

GN Mud cleaning System For HDD Sailing to Middle East

Leave a reply

Even though the passing year is really law the oil and gas industry, typically the crude oil price is into the bottom low record in the past 11 years. There is continue to need for solids control devices, this time, maybe not for oil and coal drilling, but for the HDD drilling projects, the CBM drilling projects and occasion the TBM piling operates.
The principle and functions for any mud recycling systems intended for other drillings like HDD, TBM or water very well drilling are same as solids control systems, the equipment essential:
1 . shale shaker, a single set or two, which is made the decision per the requested dealing with capacity of the whole system,

2 . desander and desilter cones, in HDD drilling, especially the large capacity HDD drillings, there is always a mud cleaner combining both desander cones and desilter cones. For smaller HDD mud systems, there is a desilter mud cleaner only. And for TBM works, because the treating typical is not so strict, they will always use desander cones together with under flow shaker.
several. Mud mixing system or even calling jet mud mixer, this is a standard equipment for all those HDD projects no matter a greater capacity one or a smaller just one. Because for HDD is effective, they need to add new chemical compounds into the cleaned drilling mud, while the pilings media is definitely water, there is no need to use the particular mixing device for adding or TBM.
Of course , every single jobsite and each jobsite’s positioned country is different in natural environment standards and regulations, therefore each set of complete system is not exactly the same, like the change in locations, in configuration, and the equipment adopted.
GN Solids Control is the leading supplier of HDD mud these mud cleaning systems for many years, and GN has experiences in more when compared with 60 countries and territories. GN’s engineer team possesses more than 20 years of functioning experience in this field. Should you have this kind of project, pls seek advice from GN for more information.

GN Solids Control Engineers Commissioning in North Africa

Leave a reply

GN Solids Control Engineers Commissioning in North Africa
Although the oil and gas market would make many oil and gas relating firms to feel sad during the past season by the low price of the unsavory oil, there are still chances for your good companies. Like GN Solids Control, their consumers are still buying. The going companies in Africa continue to be looking forward to a brighter foreseeable future to come by fully prepared to get equipments and staff.
This time around, GN Solids Control dispatched engineers to a North Africa equipment company on request of the clientele to do the commissioning of just one set of mud plant in addition to 4 sets of waste material management systems.
This is a big drilling company in Cameras which provides solids control as well as waste management systems as well as services to the oil businesses who have oil fields inside Africa. They employ employees from local Africa although importing equipments from worldwide. Before, they bought products from USA only, however in case of the low acrylic price, in order to get a crammed benefit to be larger, that they choose to find suppliers supply by china manufacturer, and they visited all principal Chinese rig manufacturers and also solids control manufacturers and lastly decide to buy from GN Solids Control.

Because:
1 . GN is most well known solids control manufacturer in China plus 1st API certified throughout China.
2 . besides API certifications, GN also got ISO, DNV CE, HSE in addition to etc certificates, showing the duty of the company to the community and environment.
3. GN Solids Control equipment quality is equivalent to the usa and Europe suppliers, within word, from GN, they will buy at a better cost than US or Eu suppliers but the quality is usually equivalent.
4. Reassured right after sale service and repalcement parts, for main equipment and also systems, GN send technical engineers for first time commissioning along with training for end user’s workers for free for 1 week.
About spare parts, GN always have essential spare parts in stock with regard to quick delivery.
That’s the reason why more and more drilling companies along with oil service companies are deciding on to cooperate with GN Solids Control.

Happy New Year

Leave a reply

As the New Year 2016 is coming, GN Solids Control would like to say Happy New Year to you all. Hope all GN friends in the new year will have a happy family and a good heath.
With the New Year 2016 arriving, GN Solids Control is another one year older. GN has growing from a small company to a modern factory which as many certificates such as API, HSE, DNV etc, all of these cannot be completed without the great help and support from GN friends. We’d like to give our since thanks to you all.
In the past 2015, GN Solids Control kept a fast growth although the oil price is sharply cut down from the top 130 usd/barrel to 35 usd/barrel. GN Solids Control equipments and drilling cuttings management systems become the first choice for many large oil and gas clients as they are trying to cut the cost. GN solids control equipments has won many large projects when completing with world famous leading companies. GN shakers, decanter centrifuges and cuttings dryers have been proven to be the best quality products with good separating performance while the price is pretty competitive.
GN Solids Control now has two branch companies: GN Solids America LLC which is located in Houston Texas and GN Solids Russian in Moscow, Russia. With the fast development, GN Solids Control will open another warehouse in Middle East. GN also has some partners working in over 60 countries to provide technical support and after sales service for GN.

GN Shaker
GN Solids America LLC is registered in 2013, and started its real business in 2014. Although GN Solids America LLC is still a fresh company in North America, with the large support from GN Solids Control, now GN Solids America has a large warehouse, which can stock over 20 sets of shakers, mud cleaners, decanter centrifuge and cuttings dryers. All the spare parts for those equipments are also in Houston warehouse for fast delivery.

decanter-centrifuges

Quantity of Shale Shaker Screen to Middle East

Leave a reply

Shaker screen is wearing elements of shale shaker, and the consumer need to replace it frequently according to drilling speed and going conditions. To serve far better of our client, GN Solids Control start the design in addition to manufacture of shaker screen from the foundation of company. You can offer GN model shaker screen, and also we can offer you replacement shaker screen usually brand shale shakers, like. replacement screen for Derrick shaker, replacement screen to get Swaco Mongoose shaker, substitute screen for NOV brandt king cobra shaker. In accordance with the jobsite feedback, our replacing screen is accepted nicely with jobsite engineers, life span and performance is similar to original company shaker screens.

Recently, we all export one large quantity connected with replacement screen for Swaco Mongoose shaker to Center East. The client is GN VIP client; they get same quantity of screens not too long ago, and repeat order as soon as they know the good performance through drilling site acceptance. The customer came to GN factory regarding shaker screen inspection; they are really very satisfied with the shaker screen quality, appearance, bundles, etc . shipping status.

Apart from replacement screen for Mongoose shaker screen, the client in addition show keen interest in GN decanter centrifuge. “In our country drilling internet site, most of brand are YOU brand like Swaco centrifuge, Derrick centrifuge, but I actually happen to see GN company centrifuge once. And the overall performance is OK; After the screen order, we will bid considerably more tenders and will put considerably more manpower and energy about centrifuge rental / centrifuge service project”. In the conference, we show our decanter centrifuge project list with past years, as well as our own centrifuge working video together with mud in rigsite. Your client is very impressed with GN high quality decanter centrifuges.

GN Solids Control is primary solids control equipment provider from China. Our product normal is same as US/Europe model product, the price is much better. Contrary to other China brand, most of us target on high end product or service and only produce high quality products with longer lifetime and good working performance. Most of us don’t waste time to produce decrease quality product with more affordable price to mislead customer.

GN Decanter Centrifuge and Cuttings Dryer Stock for sale.

5 Replies

GN Solids America LLC is a Houston side company of GN Solids Control. With the fully assistance from its parent firm, GN Solids America LLC is widely known by To the north America and South America customers.
GN Solids Control is located in Langfang, which is merely 40km from Beijing air port. Now GN Solids Control has 2 branch corporations: one is GN Solids America in Houston, the other is usually GN Solids Russia with Moscow. With the fast marketplace expanding, GN is going to determine another branch company with Middle East. In the next calendar year, the Middle East Company are going to be put into use. And the No . two factory near Beijing may also start to manufacture decanter centrifuges and shale shaker screens. For your American customers who likewise have business in Africa and also Middle East, GN can offer short lead time for several solids control and punch cuttings management systems.
As a way to meet customers’ demands for a short lead time, GN Solids America LLC possesses storaged many shale shakers, decanter centrifuges, cuttings washer dryer combos as well as many spare parts throughout Houston warehouse. GN skilled engineers in Houston may be also sent out for soon after sales service and difficulty shooting.

2015.12.02 vertical cuttings dryer
In GN Beijing headquarter, many decanter centrifuges and cuttings dryers are manufactured for urgent orders placed.
1 . GN decanter centrifuge
GN decanter centrifuges usually are widely used in over 70 countries for solids control and drill cuttings management. There are 9inch, 14inch, 18inch and 22inch decanter centrifuge if you divide them by diameter of rotating serving.
When running at various speed, GN centrifuge can be employed for different usage. Lets’ get GNLW363 centrifuge (14inch) for instance:
a. 2200RPM is suggest to recovery barite;
c. 2700RPM is recommend to minimize mud weight;
c. 3200RPM is recommend to drill down cuttings management.
2 . GN cuttings dryer
GN cuttings dryer is especially designed to different the OBM, WBM or even SBM. Many large internet businesses are using GN cuttings washer dryer combos for drill cuttings separating, such as Shell, Baker Gaines.
Welcome to visit GN Solids America warehouse or GN Beijing factory. GN machines are always available for urgent requirements.

Centrifuge for Solids Control and Waste Management

Leave a reply

In oil and gas industry for solids control equipment, the centrifuges are more and more used for separating out the fine and extra fine particles from the drilling mud system. In fact, they are taking over the former position of hydrocyclones like the desander cones and desiter cones.

Depending on the applications, the centrifuges could be divided as following items. And GN Solids Control, as the leading centrifuge manufacturer in China oil and gas industry, GN has a complete series of centrifuges, and such centrifuges cover all applications needed in the solids control and waste management systems as below:

1. solids control centrifuge. This is the centrifuge used in solids control system, as the fourth step for separate out the solids from the drilling mud. Normally, there are 2 centrifuges used in a solids control system for a large horse power system, one is for separating the valuable drilling material barite, which is expensive in price and could be re-used in future projects, the other is for separating out the particles which are too fine for the desilter cones. In most cases, GN clients use GNLW452 for barite recovery and GNLW363-VFD for extra fine particles in solids control system.

2. waste management centrifuges, for further treatment of the drilling liquid, the dewatering centrifuge. When the drilling fluid is used and reused for several times, there are extra fine particles in the drilling fluid are too fine for the centrifuge itself to get them out. So the end users need to add chemicals to merge them to be bigger, big enough for the centrifuges. In this case, GNLW363CG-VFD is recommended as the dewatering unit. And also, GN has dewatering unit available.

3. waste management centrifuge for further treatment of the solids discharged from the solids control system. When the solids are collected from the solids control system, they are not dry enough and couldn’t be discharged directly. So for the water based mud, there’s a drying shaker of High-G force and for the oil based mud, there’s a vertical cuttings dryer before the decanter centrifuge. GNLW363CG-VFD of high speed decanter centrifuge is ideal for this application. And GN also has GNZS594HGE-LD drying shaker and GNCD930CD Vertical cuttings dryer for the complete system.

Mud pit drill cuttings management system for oil field drilling

4 Replies

GN Solids Control is Chinese leading maker mud solids control devices & systemas well since oil field drilling squander mud pit waste management equipment and system.
Features of GN made solids control equipment
After mud comes out from well crown, the dirty mud could enter into GN Solids control system, and treatment simply by GN solids control gear, First step shale shaker separating, second step desander parting, third step desilter spliting up and The forth step decanter centrifuge separation.
Other GN solids control equipment: fly mud mixer for mud mixing system , poor by degasser and vacuum degasser in order to kill the gas coming from mud.
In many jobsite, we will see some mud pit with rig site. After divided by above solids control equipment, the clean mud will enter into mud system for drilling activities, often the dirty mud will released into the mud pitfor waste material treatment.

2015.07.17 solidification unit
Most popular GN manufactured equipment for mud abyss drilling waste management
1) High G drying shaker. It can be mainly used for water dependent drilling cuttings treatment. Its normally 4-panel shale shaker with high G force.
2) Vertical cuttings dryer. It is mainly utilized for oil based cuttings cure. But GN made straight cuttings dryer can be used to take care of both water based going cuttings (WBM) as well as oil-based drilling cuttings (OBM). People can use one system for everyone steps of drilling activitites.
3) High speed decanter centrifuge and big bowl big level high speed centrifuge. After handled by high G dryer shaker or vertical cuttings dryer, the fluids period will be treated by decanter centrifuge with high speed to part ways the fine solids.
Various other GN made mud ditch waste management equipment.
1) Dewatering unit (Chemical enhancing system).
2) Drill cuttings solidification system
3) Thermal desorption unit (TDU). It is used to further cure the cuttings discharged through vertical cuttings dryer. Immediately after treatment by TDU, often the oil on cuttings could be reduced to 0. five per cent.

GN Solids Control Equipments are available in America

Leave a reply

Because the leading Solids Control along with Drilling Waste Management maker in China, Hebei GN Solids Control Co., Limited established the first USA side company in Houston, TEXAS in 2013. With these two many years fast development, GN Solids America LLC is getting to help known by more and more Upper America and South America oil and gas companies, HDD organizations, Waste Water Treatment businesses.

America solids control equipment
GN Solids America LLC has a large warehouse get to to 30, 000 sq. feet. GN Solids America helps to keep many sets of shale shaker, desliters, desanders, decanter centrifuges, cuttings dryers and a few other spare parts in Freeport warehouse, all of these equipments is usually arranged for delivery in rapid sequence. GN also sends encountered engineers to customer’s worksite for after sales services and trouble shooting.
1. GN shale shaker as well as drying shaker
Shale shaker and drying shaker (also called Hi-G shaker) bring solids separation. Dry shakers are also widely used for normal water base mud separation, they can be effectively to dry the mud.
2 . GN desander as well as desilter
GN desander (8 inch cyclones) and desilter (4 inch cyclones) would be the finer phase separation accessories, they can separate solids in which larger than 20 microns.
three or more. GN decanter centrifuge

GN Solids Control Houston
Numerous sets of decanter centrifuges are available in Houston. GN Solids America is providing rental services for these centrifuges and the some other solids control and going waste management systems. Different kinds are optional from varying speed to fix speed. At the first of this year, one of the largest essential oil service companies purchased around 30 sets decanter centrifuges from GN.
4. GN cuttings dryer
GN cuttings dryers are widely used in numerous oil and gas worksite for OBM, WBM and SBM spliting up.
Many large clients worldwide are using GN mud methods and waste management techniques to treat different solids. At this point Baker Hughes, Shell, Halliburton, CNPC etc are using GN equipments for the various acrylic sludge treatment. GN mud mixing systems are also widely used throughout HDD, TBM, CBM spot.