Tag Archives: Decanter Centrifuge

Substantial Configuration HDD Mud System with Centrifuge Unit to get Heavy Mud

Most of the apaisado directional mud cleaning system is not really equipped with decanter centrifuge unit as using the 3-phase separation system which include shale shaker, de-sander and de-silter unit, it can work sufficient for removing the solids from drilling fluids. Centrifuge is relative high cost, also is a reason the drilling company doesn’t equip it inside mud system.
However , for many high request drilling situation, the driller may use often the heavy mud for a great deal better drilling performance. Sometimes the particular drillers add the selected chemicals to make the drilling mud heavier so that the mud can certainly better protect the walls of the drilling hole. In case the driller went to drill an additional well, the heavy compounds need to be separated, and then typically the centrifuge could be used to do this kind of job. In some other circumstances, after many times recycling in the drilling mud, there is considerably ultra fine solid allergens that cannot be removed from the shale shaker and cyclone model, and then the centrifuge model is needed.

GNMS-500GL_mud_system_working_at_HDD_rigsite
GN Solids Control possesses nearly 10 years in making the drilling mud system for HDD projects. This manner mud cleaning system must be compact structure and easy intended for transportation. See the picture on this page, both the de-sander and de-silter unit are equipped with under stream shaker for drying typically the discharged solids. The shale shakers used are 2-layer screen design. The bottom layer screen is used as primary shaker and upper layer screen to dry the discharges out of your cyclone units. This style greatly reduces the impact of the mud system. And all sorts of mud tank top surface equipment tend to be pre-installed on a frame using same base dimension while storage tank. When transportation the mud mixing system, the actual shale shaker and decanter centrifuge models could be removed by moving the frame for quickly disassemble. With the frame, the device could be easily transported simply by flat bed trailer.
GN can provide both standard as well as customized HDD mud system for clients. Just send out us your request, after which you will get a satisfying as well as cost effective solution.

Drilling Waste Treatment equipments shipping to Russia

Recently GN SOLIDS headquarter shipped one set of drilling waste treatment equipments to Russia, this is a repeat order from our old clients.

The equipments list as below:

One set of containerized drilling waste management system, including one unit of vertical cuttings dryer inside the container, because the cuttings treatment unit will work in Russia area where will be minus 40 degree area, the container is utilized to prevent it from frozen in winter. We open the windows or doors at the place where the operator need to operate or maintenance the equipments.

drilling waste management

One unit of cuttings shear pump, to transfer the cuttings from the mud pit to vertical cuttings dryer

Cuttings collection box, which is our standard modular designed unit, to collect the cuttings dryer discharged cuttings.

Screw conveyor, which is also used to feeding cuttings to the vertical cuttings dryer. The client bought both cuttings transfer pump and screw conveyor, when the cuttings with much moisture, cuttings transfer pump is suitable, when the cuttings is much drier, we will use screw conveyor to transfer it.

This is not the first set of containerized drilling waste management system to Russia, most of the clients will buy drilling cuttings treatment system with the container to keep them warm and the equipments with fluids will not frozen in winter. The common design is to put the decanter centrifuge and vertical cuttings dryer inside the container, and open the necessary window and doors for easy maintenance.

The clients who bought the similar containerized waste management system in Russia 4 years ago is still using the equipments well with proper maintenance, and they are satisfied with the performance.

We also design drilling cuttings treatment system for extreme hot countries with air conditioner inside the container. If you need a proper solution for drilling waste disposal, pls contact with GN solids control.

GN decanter centrifuge for no pit drilling

GN Solids Control decanter centrifuge is widely used with regard to solids control and drilling waste management. And in earlier one year, it is used for absolutely no pit drilling more. Simply no pit drilling is brand-new policy for drilling spend management to better environmental security. After treated by GN decanter centrifuge and usable cuttings dryer, the moist drilling fluids can be considerably dryer and easy transportation.

GN Solids Control vertical cuttings dryer is widely used as well as solids control and drilling waste management. And in prior one year, it is used for absolutely no pit drilling more. Absolutely no pit drilling is fresh policy for drilling spend management to better environmental safety. After treated by GN decanter centrifuge and up and down cuttings dryer, the soaked drilling fluids can be very much dryer and easy transportation.

Aside from centrifuge and vertical cuttings dryer, GN Solids Control is also providing other solids control equipment, items like shale shaker, shear pump, shaker screen, desander, desilter, mud cleaner, centrifuge, solidification unit and so on

decanter centrifuge

GN Solidification unit is a machine which is used to remaining treat the water based mud drilling cuttings. The spend solids can become stale condition after blending with lime green, or other chemicals. GN Solids solidification unit is the same as Halliburton fixation unit which can be widely used in drilling waste management. For now, we have been tests the fixation unit with COSL, China largest out sourced drilling company jobsite. The actual performance is good. And we in addition have clients from Africa who have use our fixation product for Halliburton jobsite. The functional performance is also accepted. Usually, this unit will be used to get solids discharged from Excessive G dryer or solids discharged from vertical cuttings dryer.
GN Solids Control is also research thermal desorption unit which can be used to deal with the oil based cuttings, OOC can be below 0. 3%, recover the oil and also dry the cuttings. Right after final treatment, the solids become ash and can be made to bricks.

The Grant Opening of GN No.2 Factory

Although the oil price is pretty low, GN Solids Control has succeeded to get many purchase orders on solids control equipments and drilling waste management systems. Due to GN Solids Control is pretty busy in the past, GN Solids Control decided to invest and build another factory close to GN headquarters.
We’re very excited to announce the No. 2 factory has finished the building and most of those CNC machines are fixed. GN No.2 factory finally expected the grant opening day. With the equipments manufacturing of GN No. 2 factory, GN Solids Control is able to provide decanter centrifuges, cuttings dryers and shaker screens in a short period.
GN Solids Control main equipments are largely upgraded from the establishment of GN year by year with the help of all those GN professional engineers. Due to the excellent working performance and strict manufacturing process, GN Solids Control is certified by many global certifications. GN Solids Control was the first Chinese manufacturer who awarded API certification on all series of solids control equipments includes shakers, decanter centrifuges, cuttings dryers, centrifuge pumps, desanders, desilters and mud cleaners etc.


With the wide usage of GN Solids Control equipments in over 60 countries, GN Solids Control opened two branch companies: one is GN Solids America located in Houston, TX and the other is GN Solids Russia located in Moscow, Russia. GN brand is getting to known by more and more companies around the world.
Now some professional workers are in GN No. 2 factory, they are working on manufacturing decanter centrifuges and cuttings dryers over there. Hundreds of GN decanter centrifuges and cutting dryers are in stock. They can be delivered by mounting the motors and testing running which only takes about 7 days.
GN Solids Control has successfully provided many solids control equipments, hundreds of mud systems are also provided to global clients. Welcome to visit GN headquarters and GN no. 2 factory which is only 45 mins drive from Beijing airport.

GN Decanter Centrifuges In Stock

GN Solids Control is one of the world most significant decanter centrifuges manufacturers based in China. From the glorious commencing of GN Solids Control, GN is devoted to be a well known and respectable top company in the world.
With the quickly development, GN Solids Control has opened the Des moines branch company GN Solids America and Moscow department company GN Solids Spain. GN Solids Control is becoming to known by a growing number of energy companies locally in addition to globally.
GN Solids Control is especially good at manufacturing decanter centrifuges and cuttings electric drying machine, which can be used for recover barite, cut the mud bodyweight etc . Although the oil cost is drilling down with the complicated governmental or economical reasons, GN Solids Control get more and even more orders due to the advantages affordable characteristics.

160325SolidsControl
Now GN Solids Control is ready to open an additional manufacturing plant which is close to GN headquarters. In order to provide a better guide time, GN Solids Control has manufactured some decanter centrifuges and get them looking forward to delivery in a short period.
The majority of GN decanter centrifuges usually are stocking in GN Number 2 factory. They can be shipped in a short period after put together the motors and thouroughly tested before leave factory.
GN Solids America LLC features a large warehouse in Des moines, TX. Many decanter centrifuges are in stock. GN gives several different models, such as 18 inch, 18 inch along with 22 inch rotating pan centrifuges.
GN has a couple of different models including premium variety and economic type in order to meet different clients’ demands. Right now GN has some large drilling companies are oil & natural gas service companies keeps obtaining from GN Solids Control. GN provides solids control and drilling waste management systems to global customers. Many large companies for instance Baker Hughes, Shell are usually buying from GN to get they OBM, SBM healing. Welcome to visit GN Freeport warehouse, GN professional technicians will show you around.

Decanter centrifuge used in construction industry

As a API certified solids control company in China, GN has enlarge it’s market from traditional market drilling waste of oil well to the other environmental protection field. Decanter centrifuge as a core product of GN, has developed to the 3rd generation, and has been exported to America, Europe, Russia, Middle East, Africa and Asia-Pacific countries etc.

How is decanter centrifuge used in construction industry?

We know that there will be always some waste water produced during piling, especially in some area, waste water is not allowed to discharge to sewer directly, and the mud water will be clean after some time by gravity separation, and the waste water can be transport by truck tank also. While both of this two solution will be take too much time or costly. Now there is one solution, separate solid by decanter centrifuge, after the drilling fluids is separated by decanter centrifuge, the fluids can be discharge to sewer directly, and there will be less solids to be transported by truck.

decanter-centrifuge

Normally, for construction industry, GN has design a compact mud cleaning system , it including the following:

  • GNZS706E-HBdouble deck shale shaker, with top deck for coarse solids separation, and bottom deck for fine solids separation
  •  High Speed decanter centrifuge for ultra-fine solids separation.

Decanter centrifuge used in UK

 

Mean while decanter centrifuge is also widely used on many area:

Nowadays the environmental problem is getting serious and GN as a leading factory who is focusing on solids control machinery, will continue to improve the our decanter centrifuge to make it easy maintenance and long life operation.

GN will go to CIPPE & OTC inside coming two months

GN Solids Control is definitely attending CIPPE 2016 Beijing oil show at 30 to 31, March. Most of us welcome clients from international to visit GN booth along with talk more business cohesiveness. If client miss CIPPE oil show , we also have OTC U . S . oil show in Could and Iran oil demonstrate in May. The client also can visit GN boot within USA or Iran that is certainly close to client. The equipment is practically same, we will take the large technology solids control devices to the exhibition and show the great product and talk much more business with clients coming from different countries.

CIPPF 2016

1) Decanter centrifuge

Decanter centrifuge is key equipment regarding solids control / drilling waste management. During CIPPE oil show, the centrifuge family will be there, such as baby centrifuge (9inch centrifuge), 14inch decanter centrifuge, 18inch decanter centrifuge and 22inch big bowl big capability decanter centrifuge. During NON-PRESCRIPTION and Iran oil present, only the 14inch jar centrifuge will be show right now there. Because this model centrifuge is among the most popular for solids control industry application.
2) Up and down cuttings dryer
Vertical cuttings dryer will likely be shown at CIPPE necessary oil show, Beijing and OVER-THE-COUNTER oil show, Houston. This particular vertical dryer is used intended for drilling waste management. The majority of client for this unit is usually from China, Iran, UAE, Nigeria, Algeria, etc . But undoubtedly, more and more countries will get the vertical cuttings dryer to obtain better protection for natural environment.
3) Shale shakers or maybe High G drying shakers
Shaker will be shown in CIPPE or OTC. The customer may compare the GN shaker advantages at the display compared with other brand shale shakers. We have many particular on the shaker and also shaker screens.
But if you want to examine more equipment, we advise client to CIPPE acrylic show which is only 40km far from GN factory. We all invite client visiting GN factory at the same time to know manufacturing and raw material along with GN production management and so forth

GN New Developed Decanter Centrifuge

GN New Developed Decanter Centrifuge
GN Solids Control manufactures over 300 sets decanter centrifuge every year. Most of the centrifuges are using in the overseas market, and only 30 percent decanter centrifuges are using in China. GN Solids Control equipments are successful to meet various customers’ demands for solids control and drilling waste management.
GN Solids Control provides many different centrifuges, such as 9 inch rotating bowl centrifuge for diamond drilling or mining, 14 inch and 18 inch for oil and gas slurry separation or industrial water dewatering, 22 inch rotating bowl for large volume separation.
This year, GN Solids Control provided one more compact decanter centrifuge with smaller supporting frame or stand for the centrifuge, which can be used for worksites without much large room.

gn cippe 2016 6
GN Solids Control engineers provide this newly developed decanter centrifuge which can transport easily for mobile treating systems. The working performance and products quality are still as good as the former large version.
Now GN Solids Control has the C version centrifuge. There are some important changes compare to the B version.
1. GN C version centrifuge is feeding from the large end rotating bowl, which helps to improve the feeding capacity largely.
2. The solids discharge port on the rotating bowl and liquid discharge port on the screw propeller are all protected with ceramic, which is much better for long time usage without wear.
3. GN also improved the screw propeller by make some openings on the screw propeller which helps to have a large separating capacity too.
GN Solids Control also provides modular decanter centrifuge treating unit, including decanter centrifuge, stand, screw pump and all the related pipes and accessories. This modular centrifuge can be used to equip with the current shaker or cuttings dryer in customer’s worksite conveniently. Customers can use this decanter centrifuge directly when some simple assembling work.
GN Solids America Houston office also provides modular unit for Hi-G shaker and Cuttings Dryer, for more info please feel free to contact us.

Improvement on drilling cuttings unit

20GN Solids Control is the first solids control company who start to produce drilling mud system. After we have some jobsite experience, we will do some improvement based on the first generation equipment.

We have clients who use our drilling cuttings unit and reply as below:

A Fixation Unit is a good unit when running but, the one that is at Rabi is a bit limited , there is no control of the operational equipment exept stop and start, also there is no batching instrumentation so as to regulate volumes of cuttings to additive and the operators have to guess at what is being added .
Also the chemical tanks are too small and the guys get caught out frequently when they run out of cement.
Cleaning is another issue, as the unit seems to be very difficult to clean out, myself and Murdo cleaned it out for the guys one night to see what was involved, and managed to clean it so as to have clean clear water running out the end.
It may just be the type of solids that we are processing are not suitable for the process in their current form and as discussed previously needs to be blended with sand or some other medium to bind them together first.
If the unit was only processing cuttings then I think it would cope with no problems.

After we know more information, we reply as below:
Our engineer Mr. Wang also gave us some feedback for improvement after he came back from jobsite. It is VFD control for the auger system in our design. But as some internal communication mistake, we wrongly make it as fixed speed. We are now making the new VFD control panels, and will send to you soon.
Regarding the chemical tank, we also decide to improve. Could you pls check with the jobsite and let us know what volume tank you need? And what capacity you need for the augers? Then we can consider in our design.
Our engineers are working to improve the cleaning of the system. We will send you the upgraded design for check once we finish it.

We definitely will improve the drilling cuttings unit much better and give more reliable service to the clients.

 

Welcome to CIPPE 2016, GN booth in E2

As the coming of year 2016, comes the CIPPE 2016 in March soon. It is one of the largest and famous Oil Shows in the world.

There are 3 main oil shows which are held each year in 3 different places, one is OTC, based in Houston, Texas, the oil center of USA. In drilling industry, Houston is the technical center, and nearly all TOP manufacturers have their headquarters or branch offices there. GN Solids Control is the first Chinese solids control company who started the office and branch in USA. In Houston, Texas, GN Solids Control has the branch company with name of GN Solids American. You will see GN booth in OTC also, in May, 2016.

Another international Oil show is based in Abu Dhabi, UAE, which is the oil field center of the world in Middle East. Abu Dhabi spread it’s affluence to the whole middle east. And Abu Dhabi oil show also attracted all the main oil and gas related companies in the world, and visitors are from many countries, including but not limited to middle east countries.

cippe 2016

Then, the CIPPE Oil Show in Beijing, held in each March. Since China has become the world manufacturer for a long time, lots of manufacturing for oil and gas related equipment and technologies are moved to China. Also the three giants of Chinese Oil companies are spreading their strength all over the world. Now CIPPE China is attracting more and more companies and visitors especially when the oil price is low.

GN Solids Control has attended CIPPE for many years, and each year, GN would bring the most advantaged equipment with the new design or improvement. Such improvements are based on the jobsite feedbacks and the suggestions from the old clients. Comparing with GN clients, GN knows better for manufacturing equipments, But the clients who use the products everyday in their work, knows much better how to improve them and how to make them to be more efficient.

If you need more information, welcome to visit our booth in CIPPE 2016, in Beijing in E2 Hall.