Author Archives: dwastem

GN Shaker Screen Stock Plan (B)

We have discussed on the GN shaker screen distributor agreement before, today we would like to pick up that topic can continue our conversation.
4. GN Distributor has the right to return maximum 500 pieces brand new GN shaker screens to GN houston warehouse at GN Distributor’s cost, return period is 7 days before the end of the first year’s stock agreement, example: if GN Distributor and GN signed the stock agreement on Aug. 10th,2016, then GN Distributor can return maxmim 500 pieces from Aug. 3rd to Aug.9th, 2017. All cost related to returning those screens to GN Houston warehouse will be borned by GN Distributor.
5. GN will accept those returned GN brand new screens. Stock plan will be proceed based on GN Distributor’s screen demands, so GN Distributor stock qty. can reach to 1000 pieces at the end of the first cooperation year.

6. This stock agreement between GN and GN Distributor will be valid for 2 years unless GN and GN Distributor decide to extend the cooperating period. All the balance credit will be calculated and paid at the end of the second cooperation year within 7 days.
Notice: For some screens that not used a lot especially for those old screens such as National screens, they are usually not included in this stock agreement, 100% need to be paid before manufacturing. But for the other shaker screens, such as repalcement Venom screens, Mongoose screens, Derrick screens, GN Solids America LLC has no problem to stock for you.
In the future, GN Solids America LLC will stock composite material type (replacement Venom or Mongoose) for GN distributor. Compare to the metal frame screens, composite material screens can be stocked for a longer time (you could stock for over 2 years without any damage), the life period is longer and the separating performance is much better.

How to choose the suitable drilling waste management system

Leave a reply

As more and more countries start to control the drilling waste and improve the standard of waste discharge in oil and gas drilling field, drilling waste management becomes more and more popular and important. Many companies have to or want to start their business for drilling waste management. But many clients do not have experience on it. They do not know how to choose the suitable equipment or systems for their activities.

As a worldwide famous brand on mud solids control and drilling waste management, GN Solids Control start its research and development department for drilling waste management and industry waste management for many years. Below is a brief introduction of normal drilling waste management equipment to help the users make decision.

1) High G drying shaker.

It is also named High G dryer, cuttings dryer. It utilizes high G force up to 8.0G to dry the cuttings. If there are big particles in the solids waste, high G shaker is requested. It can remove big size solids and even metal particles. The high G shaker can remove solids above 100 microns.

It is mainly used to treat the water base mud and water based mud cuttings. It can also be used for oil based mud treatment in some cases.

When the high G drying shale shaker is used to treat oil based mud and cuttings, it can only reduce the oil on cuttings (OOC) to 10 ~ 15%.

2) Vertical cuttings dryer

It is also called vertical centrifuge or vortex dryer. It utilizes centrifugal force up to 420G to separate the fine solids and recovery the usable drilling fluids. The screen opening of VG dryer is 0.5mm, 0.35mm and 0.25mm. It cannot allow big size sizes solids or metal particles; otherwise, it will be broken.

Vertical cuttings dryer is mainly used for oil base mud and cuttings. It can reduce the oil on cuttings to 3 ~ 5%. In this case, the solids discharge is on a very dry condition and it is easy for shipment. And the solids with 3~5% OOC can be discharged directly in many countries. If not, it is also easy for next treatment.

3) High speed centrifuge and big bowl decanter centrifuge

It utilizes the high centrifugal force to separate the very fine solids to 2～5 microns. It is used after high G shaker and vertical cuttings dryer, for further separation.

There are many other equipment used for drilling waste management, we will introduce in next file.

GN Dredging Dewatering System

Leave a reply

GN Solids Control has been working on manufacturing varieties of mud systems, some turnkey solutions such as dredging dewatering mud system, HDD mud system, TBM slurry separation system etc are also widely manufactured.
GN Solids Control is especially good at providing slurry separation or solids control. GN has provided over thousands of mud systems for global industries. With the fast development of solids separation, GN Solids Control is getting to known by more and more clients.

GN Solids Control now has one branch company in USA and one office in Russia. Many partners are also working with GN Solids Control and providing after sales service on behalf of GN Solids Control.
Recently, GN Solids America LLC has received many inquiries on dredge dewatering mud systems in North America. As there are many lakes and rivers in North America, it’s very popular in North America to use dredge dewatering mud system.
GN Solids Control built GN Solids America LLC in 2013, which is still a pretty young company right now, but many companies knew GN before due to those excellent mud systems that GN provided before.
For the dredging mud system, GN Solids Control has some different solutions based on customers’ demands. Generally speaking, there should be one scalping shaker, one finer shaker (with assembled with cyclones most of the time). Double deck shakers are widely used as the system will be more compact. Flocculation systems are also commonly used to adding into the slutty with finer solids before feeding into GN decanter centrifuge.

cuttings-drying-shaker
GN Decanter centrifuges are mainly used to separate solids larger than 2-5 microns, with the use of flocculation system, finer solids can be separated out. Some clients will use filter press or pressing machines. If you compare the working efficiency and treating capacity, you will find that using one set of GN VFD decanter centrifuge will be more cost effective.

High Standard Decanter Centrifuge with ATEX as well as DNV Certificates Sent to European countries

Leave a reply

Friends and clients who had been keeping their eye about GN will find that more and even more giants in this oil sector started their contact with GN Solids Control, some of them perhaps already placed orders to help GN. The reason for this enjoyable situation is GN increasingly more focus on providing equipment with good standard, just like, in this article, the actual decanter centrifuge was brought to Europe with DNV moving certificate and ATEX regarding explosion-proof.

How to Understand the Type of GN Decanter Centrifuge
Often the model of the centrifuge is definitely GNLW363CG-VFD. Editor thought it may be necessary to explain what the type number means to help clients’ understanding and better deciding on on GN decanter centrifuge. LW in Chinese indicates horizontal spiral type centrifuge that is typically used in necessary oil industry. C tells your third generation of GN centrifuge shows in the past nearly several years, GN solids control was always keeping in upgrading and improvement. The particular G means this design is a high configuration together with bowl material of de dos niveles stainless steel 2205 which is greater than other China based company who still use SS304. Inside the bowl, screw propeller are made of SS316 and protected simply by 4mm thick tungsten carbide tiles. Comparing with other China and taiwan manufactures’ spray welding 2mm protection, GN’s screw propeller has much longer lifetime that could greatly reduce the future maintenance charge. For more flexible operation objective, the client chose the variable occurrence drive for different working pace.

What Certificate GN is wearing providing the Equipment
Clients with Europe are cautious for you to get machinery from China manufacturer, as numerous certificated would be requested from the safety department when jogging the machine. In order to eliminate the client’s worry, GN provided the particular decanter centrifuge with The european countries certificate of comply. All of the electric motors and VFD control panel are provided together with ATEX certificate. DNV can also be requested very commonly simply by clients from Europe.

GN decanter centrifuge is slowly accepted by the clients via high standard market having strict request. All the vouchers obtained well proved this particular. Actually, GN now has one particular unit solids removing device working in London including both decanter centrifuge and shale shaker unit.

GN Employees Enjoyed in the Thailand Travel

Leave a reply

GN Solids Control is the top 1 manufacturer for solids control equipments such as shakers, mud cleaners, desanders and desilters. GN also manufactures drill cuttings equipments such as decanter centrifuges and cuttings dryers. Various feeding pumps are manufactured by GN.
GN Solids Control equipments are very popular in global countries, all of those ambulance achievements are achieved with the effort of GN employees’ hard work. Thanks for all GN employees, every year GN Solids Control rewards hundreds of employees who contribute to GN. Last year, there were 3 GN employees were given nice cars (total value is about 40,000 usd). Many employees also received large red pockets, and filled with cash of course.

This year, some GN employees are awarded to travelling. There are two teams, one is for Thailand and the other is for Europe for overseas travelling. While there are some employees travelling in domestically, which are Hong Kong and Macao.
GN Solids Control always treasure employees as the most precious assets. Actually, all GN employees are working like a large family, everyone tries the best to finish the work belongs to his duty. While if there’s a project need to work a little bit longer, all of them are willing to working after the closing hour. GN employees have been successfully provided many large projects with hundreds or even thousands of solids control and drilling waste management equipments in a pretty short period.

This year, the oil price is very low, many drilling companies have stopped to purchase new equipments. Compared to last year, GN Solids Control has the chance to relax for a while, so GN employees are paid by companies to travel and have fun. Actually, GN Solids Control are not just relaxing, there are still some large projects GN will finish in the near future. And some GN core products are also upgraded with those precious feedbacks collected from work sites. In the next year, GN can do much better!

GN Dredging System

Leave a reply

GN Solids Control has provided many dredging systems for our clients. Almost all the GN dredging mud systems are customized in order to meet customers’ needs perfectly well. GN also manufactures standard mud systems for dredging.
For dredging, typical slurries have the following composition ranges. There are different layers in the sediment. For natural lakes, coarse debris is found near the river inlet and fine material builds up near the outlet. UAT customers also use the dredges for many man-made water bodies that can have unusual layers of materials.
Solids: 0-30%, typically 5-20%
Coarse debris (>6mm): 0-70%
Sands (0.07 – 6 mm): 10-100%
Clays/Silts/Organics (<0.07 mm): 0-100%

GN Dredging System
It is better to size the dewatering equipment for the majority of production, instead of the most difficult requirements. Design the dewatering equipment to handle only the 20% MAX solids slurry at the specified flow rates; the dredger using UAT’s small equipment can decrease the flow rate for the occasions where they are processing high-solids slurries.
1. GN Solids Control manufactures a scalper in the system before sending the sands/clays/silts to the shale shaker. Coarse debris includes rocks up to 10cm, trash, leaves, twigs, and sea shells. Screens on GN scalper are made from metal or polyurethane.
2. For the 4 stages separation, after separated by the scalper, GN Solids Control provides one shaker for second phase separation. The shaker will be a double deck shaker with different API Nos. shaker screens.
3. GN cyclones are used based on the mud they are separating. Bottom shaker will be the same as the shaker using in the front.
4. Generally speaking, GN equips one polymer adding unit before sending to GN decanter centrifuge. By adding polymer, fine solids will gather together and it will help the centrifuge to separate them out. GN Solids Control also manufactures standard dosing unit which the same size a 20 ft container.

Happy Marriage for GN Solids Control And Akros

Leave a reply

As the leading solids control manufacturer and drilling waste management provider, GN Solids Control just signed a win-win cooperation agreement with one famous service company from Russia which is Akros LLC. This will definitely be a happy and exciting marriage between strong companies.
In the future, GN Solids Control and Akros will work as a close team and strategic partner to develop the Russia market together. With the fully support from each other, GN Solids Control can provide the most cost-effective solids control equipments and cuttings management systems for Akros, and Akros will have the most suitable equipments to develop Russia market with the current channels.

GN & Akros Team
GN Solids Control is the leading solids control provider, most of GN equipments are exported to over 60 countries. Now GN Solids Control has one American branch company locates in Houston, TX and one Moscow office. With the cooperation agreement with Akros, GN Solids Control will be able to provide our equipments with the best after sales service.
GN Solids Control has provided over 4 sets of decanter centrifuges and cuttings dryers to Baker Hughes in 2014, and they are very satisfied with the working performance. Some other drilling companies are also showed great interests to use GN products. In the future, clients in Russia will be able to have GN solids control and drilling waste management equipments from our partner across Russia.

GN & Akros Oil Show
GN Solids Control always opens to discuss on the long time win-win cooperation with global clients. Actually, now GN Solids America LLC is looking for distributors in America, Canada and Mexico for selling shaker screens. Welcome to connect with us for become a long time partner.
GN Solids America LLC has a warehouse in Houston which keeps thousands of shaker screens in stock, some other equipments are also widely stocked such as shale shakers, mud cleaners, decanter centrifuges and cuttings dryers etc.

GN Solids Control working for oil drilling field

Leave a reply

Recently, we just export one batch of solids control equipment to Middle East. The equipment including some sets shale shaker, some sets mud gun, some sets mud agitator, some sets of centrifugal pump etc. The entire product is going to Middle East for land rig operation mud system.

Except above equipment, GN Solids Control also have other super star equipment to give high efficiency working performance, and with very lower price.

1) Decanter Centrifuge

Decanter centrifuge is necessary equipment working for oil drilling mud system. Most of client will need 2 sets centrifuge for operation. The dual centrifuge system including one set high speed centrifuge for lower gravity solids removal; one set lower speed or middle speed centrifuge for high gravity solids removal; screw pump for feeding the dual centrifuge will be also concluded, as well as telescopic high skid for installation.

2) Vertical cuttings dryer

Vertical cuttings dryer is to deal with the waste discharge from shale shaker, recycle the valuable drilling fluids and dry the solids. This vertical dryer is very good use for oil based mud drilling cuttings. The OOC can reduce down to below 5%, much convenient for following transportation or next stage treatment.

3) High G drying shaker

If for water based mud, most of client choose High G drying shaker. The performance of High G drying shaker is not that good as vertical cuttings dryer, but much lower purchase cost and maintenance cost. GNZS594HGE-LD HIGH G drying shaker is used in many different drilling rig site. And the high working efficiency performance and less maintenance give good reputation for GN Solids Control. The shaker screen is replacement for SWACO mongoose shaker, composite material. If the client have GN this model shaker and need shaker screen urgently, the client can buy Mongoose shaker screen to mount it on GN shale shaker.

However, we recommend clients to buy some shaker screen in stock for use in advance. Because the price of original Mongoose shaker screen is much higher cost.

GN Decanter Centrifuge and Shaker for Middle East Client

Leave a reply

GN Solids Control just got another repeated order on decanter centrifuge and shaker from one Middle East client. Although the oil price is still very low, many drilling companies are stilling drilling, anyway, if you drilling then you can make money. On the same time, you need to think about to use a very good equipment to do the work and save cost.
GN Solids Control manufactures over 300 set decanter centrifuges and 500 sets shale shakers every year, most of which are using in the oversea market. Thousands of successful projects have been proved to be worth use GN Solids Control equipments and drilling waste management systems.
As one branch company locates in Houston, TX, USA, GN Solids America LLC has one warehouse which keeps many shakers, decanter centrifuges and cutting dryers in stock. This project is made due to GN Solids America has these equipments in stock and can be arranged for delivery immediately. This Middle East client came to GN Houston warehouse and checked those decanter centrifuges and shakers before make the final purchase order.
1. GNLW363 Decanter Centrifuge
This is the star products made by GN Solids Control, with the treating capacity of 130 GPM, excellent rotating bowl made of duplex stainless steel, screw propeller edges are covered with hundreds pieces of tungsten carbide tiles. Many large companies are also using GN Solids Control decanter centrifuges such as Shell, Baker Hughes and Halliburton etc.
One VFD control cabinet is also used; all those parameters such as the bowl rotating speed, and differential speed etc can be changed easily on the HMI.

Decanter Centrifuge
2. GNZS594 shale shaker
GNZS594 shaker is using USA made Martin vibration motors for long time usage, large thickness metals are using to make the shaker deck in order to have a better linear motion. There are 4 pieces shaker screens fixed on one 594 shaker. Shaker screen size is the same with Mi-Swaco mongoose.

GN Shakers in Houston

GN Mud Tank System for Sale with 30% Off

Leave a reply

We have one mud tank system on sale news in 2012, reading in below chapters:

Start

GN Solids Control has 3 sets complete mud tank system each with 7 mud tanks in stock they are brand new system which was built in 2011.It was built for Iraq project, we have already shipped 2 sets. Due to the situations there, the project will be delayed or canceled. GN now will sell left 3 sets system mud tanks at 30% Discounts.

Location now: Beijing, China Welcome the buyers come to check and discuss

We have already sold one same system to the China Largest Oil Rig manufacturer SJ Petroleum a Sinopec company for PDVSA Project in Venezuela.

Applications for the mud tanks:

1000HP/1500HP oil rig complete mud system with Derrick Solids Control or GN Solids Control Equipments.

Liquid mud plant

HDD/CBM/Oil Drilling Mud Storage Tank or mixing tanks/recycling tanks.

Items including:

1) Mud tanks

7x400BBL Mud Tank for one set 3 sets total capacity=8400BBL Dimension(LxWxH):12000x2900x2300mm Including Shaker Tank, suction tank, storage tanks, mixing tanks completed with agitators, mud guns, centrifugal pumps.

2) Solids Control equipment

3x Linear Motion Shale Shaker, GNZS594 shaker Model equivalent to Swaco Mongoose shaker.

1xVacuum Degasser, GNZCQ360

1xMud Cleaner with 3x10inch desander and 16x4inch desilter, underflow linear motion shaker, GNZS594 mud cleaner, equivalent to Swaco Mongoose shaker mud cleaner

2xDecanter Centrifuge, GNLW363CG decanter centrifuge equivalent to Derrick DE1000 or Swaco 518 centrifuge.

Remarks:

The configuration for above is flexible,you can choose not ot have decanter centrifuge or degasser or less shale shakers etc.

If the buyer want a complete drilling rig,we can sell the complete drilling rig to you with high standard configuration.

END

Above sales news is not available now, but however if some customer need some solids control equipment or mud cleaning system at the moment, we can offer almost same discounted price, the delivery time is also not long, because we have some main equipment in stock for urgent project.