Tag Archives: mud system

3 sets GN Bored Piling Mud System for Asia Customer

As a turnkey mud treating system provider, GN Solids Control manufactures various standard mud systems and customized mud systems to meet customers’ demands. GN mud systems now have been largely used in oil and gas drilling, HDD, Trenchless, Bored Pile Drilling, TBM, CBM etc. With more and more customers pay great attention to the necessary of environment protection, treat the drilling mud is become a standard step. As we know, dig a large hole and pour the mud in the mud pit is strictly forbidden by most the customers.
GN Solids Control just finished the manufacturing of 3 sets bored pile drilling mud systems for one Asia customer. GN Solids mud treating systems now is widely recognized by customers from many countries: just take the Australia mud treating systems industries as an example, you will find most the mud systems are using GN Solids Control mud treating systems. GN Solids Control is one of the first mud treating system manufacturer that come from overseas. At first GN Solids Control met severe competitiveness in Australia, but GN Solids Control final won customers with the excellent cost effective feature. GN professional is always devoted to provide the best quality products for customers.

16.12.28 Bored Pile Desander 2
GN Solids Control now manufactures two types mud systems:
1. Compact Mud System
GN compact mud system just has one treating desander or desilter mounted on the top of a small mud tank. It’s equipped with one centrifugal pump to feed the mud into those cyclones. And the bottom shaker is used to separate out finer solids.
2. High Configuration Mud System
GN high configuration mud system is composed by the treating shaker, desander or desilter and storage mud tank. The treated mud can be stocked in GN mud tank which can be reused for drilling.
GN Solids Control also provides customized mud systems based on customers’ special demands. If you have some particular work need to do, please feel free to connect with Thomas@gnsolidscontrol.com, we’d like to manufacture a tailored mud treating systems. We will not satisfy until you satisfied. 16.12.28 Bored Piling Desander

operate the cuttings dryer system after long time off status

If we operate the cuttings dryer system after long time off status, we need to inspect motor rotary unit on insulation. Use 500V Ω gauge, get resistance is not larger than 0.5MSZ, we can run the shaker

Notice: ① If the motor doesn’t run at all, we must shut off the power immediately to avoid motor broken
② After starting motor, to inspect, whether this is any problem. If there is any break off or uncommon noise. If two motors are not running in-phase we need to stop the motors and get rid of problems then turn it on again for operation
③ When motor is under cold status, should not be started 5 times continuously; when motor is turned off under hot status, the restart can not be over 3 times continuously
Shaker screen maintenance
① Before every shut off, the shaker should run without any medium for 5-10 minutes, at the same time, use clean water to flush screen clean
② Every time finish operation, the shaker frame and screen should be flushed by water (summer) or steam (winter), there should be not much sediment on shaker frame and shaker screen. Especially when the drilling mud has large viscosity and high density or screen is finer than 60 mesh. Otherwise, the particles and fine sand on screen will block screen hole, when we start shale shaker, it will decrease filtration result and lead drilling mud flow away, lose much unnecessary cost.
cuttings dryer maintenance
Electric control cabinet is explosion proof magnetic starter, the electric principle is as fig VI, if there is any trouble we must shut off the power, and repaired by electrician or specific person
Spare parts for GNPS752
No. Name Model Unit Qty Remark
l Vibration motor MVE2400/15D Set 1 1.0kW
2 Vibration motor MVE1100/15D Set 1 0.4kW
3 Shaker screen 750×900mm PC 2 40/20目
4 Tension wedge PC 4
5 Spring PC 4
6 Damping horizontal strip PC 4
7 Damping vertical strip PC 4
8 Enclosed files for GNPS752
9 GNPS752 Shale shaker user manual 1 set
10 GNPS752 Quality certificate on shale shaker 1 set
Resource Box :
The author of the article recommends,if need pls contact us

Gnsolidsamerica company produces high cost shale shaker

This section contains a summary of WARNINGS. The ZCQ Degasser has been designed to perform the stated functions safely.

All persons responsible for operation and maintenance of this equipment must read and understand all safety information in this manual prior to operating and/or maintaining the equipment. The safety warnings listed below are included in applicable procedures throughout this manual.

This section describes the recommended installation procedure for the ZCQ270/360 Vacuum Degasser. Instructions include site preparation, equipment leveling, feed

and discharge connections, and electrical connections.

Gnsolidsamerica.com is the owner of the article on shale shaker screen  and shale shaker , pls click gnsolidsamerica to know more info,pls visit us http://www.gnsolidsamerica.com/linear-motion-shale-shaker.html