mud mixing system | Drilling Waste Management Equipment

As China primary manufacturer for solids control and drilling waste management programs and equipments, GN Solids Control has been one of the most popular brands in Russia for countless years. Ever since GN firstly made the first generation Vertical Cuttings Dryer for the drilling waste management application, clientele from Russia has bought them and have been using GN products for many years. Their suggestions and suggestions encouraged and also helped GN to make a wide range of improvement.

This newly provided package of drilling cuttings waste management equipments incorporate a vertical cuttings dryer, a new drilling cuttings conveying pump and screw conveyors. Obviously for the vertical cuttings dryer, there is a screw pump to get flushing.
The special place for this drilling waste management system is the containerized design, may be the container. It is like a remoteness overall for the vertical cuttings dryer. As is known to most, the winter in Russia is quite cold, which could affect the effectiveness of the vertical cuttings dryer. Meanwhile, when the treated stuff is of lower heat range, the material is of higher viscosity and of less liquidate. The particular container could reduce the adverse affect from the weather.

Much like in some extremely hot locations, with a high temperature and the sunshine is fierce, like in Cameras and Middle East, owners always make a sunshade for that equipment in case the high temp affects the performance of apparatus.
This drilling waste management package deal is not the first one GN solids control presented to Russia, years ago, GN has turned a similar system for Russian federation with isolation outside with regard to keeping warm. And GN standard drilling cuttings waste management systems are being used through Baker Hughes. The end customers and operators are supplying good feedback.

Not only in The ussr, GN drilling waste management programs and equipments like the central products, decanter centrifuge, top to bottom cuttings dryer, high H drying shale shaker and other machines like the screw conveyors in addition to screw pumps are popular in more than 60 places and regions including Down under, Brazil, Canada, Egypt, Kuwait, Saudi Arabia, Iran, Iran, Singapore, India and and so on Now besides GN headquarter near Beijing, China, you might like to contact GN directly by means of GN branch companies within Houston, USA and Moscow, Russia.
For any question, here you are at contact us freely.

Most of the apaisado directional mud cleaning system is not really equipped with decanter centrifuge unit as using the 3-phase separation system which include shale shaker, de-sander and de-silter unit, it can work sufficient for removing the solids from drilling fluids. Centrifuge is relative high cost, also is a reason the drilling company doesn’t equip it inside mud system.
However , for many high request drilling situation, the driller may use often the heavy mud for a great deal better drilling performance. Sometimes the particular drillers add the selected chemicals to make the drilling mud heavier so that the mud can certainly better protect the walls of the drilling hole. In case the driller went to drill an additional well, the heavy compounds need to be separated, and then typically the centrifuge could be used to do this kind of job. In some other circumstances, after many times recycling in the drilling mud, there is considerably ultra fine solid allergens that cannot be removed from the shale shaker and cyclone model, and then the centrifuge model is needed.

GN Solids Control possesses nearly 10 years in making the drilling mud system for HDD projects. This manner mud cleaning system must be compact structure and easy intended for transportation. See the picture on this page, both the de-sander and de-silter unit are equipped with under stream shaker for drying typically the discharged solids. The shale shakers used are 2-layer screen design. The bottom layer screen is used as primary shaker and upper layer screen to dry the discharges out of your cyclone units. This style greatly reduces the impact of the mud system. And all sorts of mud tank top surface equipment tend to be pre-installed on a frame using same base dimension while storage tank. When transportation the mud mixing system, the actual shale shaker and decanter centrifuge models could be removed by moving the frame for quickly disassemble. With the frame, the device could be easily transported simply by flat bed trailer.
GN can provide both standard as well as customized HDD mud system for clients. Just send out us your request, after which you will get a satisfying as well as cost effective solution.

Drilling Waste Management Equipment

Tag Archives: mud mixing system

GN Containerized Waste Management Package intended for Russia

Substantial Configuration HDD Mud System with Centrifuge Unit to get Heavy Mud