Monthly Archives: April 2016

GN will go to CIPPE & OTC inside coming two months

GN Solids Control is definitely attending CIPPE 2016 Beijing oil show at 30 to 31, March. Most of us welcome clients from international to visit GN booth along with talk more business cohesiveness. If client miss CIPPE oil show , we also have OTC U . S . oil show in Could and Iran oil demonstrate in May. The client also can visit GN boot within USA or Iran that is certainly close to client. The equipment is practically same, we will take the large technology solids control devices to the exhibition and show the great product and talk much more business with clients coming from different countries.

1) Decanter centrifuge

Decanter centrifuge is key equipment regarding solids control / drilling waste management. During CIPPE oil show, the centrifuge family will be there, such as baby centrifuge (9inch centrifuge), 14inch decanter centrifuge, 18inch decanter centrifuge and 22inch big bowl big capability decanter centrifuge. During NON-PRESCRIPTION and Iran oil present, only the 14inch jar centrifuge will be show right now there. Because this model centrifuge is among the most popular for solids control industry application.

2016  OTC
2) Up and down cuttings dryer
Vertical cuttings dryer will likely be shown at CIPPE necessary oil show, Beijing and OVER-THE-COUNTER oil show, Houston. This particular vertical dryer is used intended for drilling waste management. The majority of client for this unit is usually from China, Iran, UAE, Nigeria, Algeria, etc . But undoubtedly, more and more countries will get the vertical cuttings dryer to obtain better protection for natural environment.
3) Shale shakers or maybe High G drying shakers
Shaker will be shown in CIPPE or OTC. The customer may compare the GN shaker advantages at the display compared with other brand shale shakers. We have many particular on the shaker and also shale shaker screens.
But if you want to examine more equipment, we advise client to CIPPE acrylic show which is only 40km far from GN factory. We all invite client visiting GN factory at the same time to know manufacturing and raw material along with GN production management and so forth

GN will go to CIPPE & OTC inside coming two months

GN Solids Control is definitely attending CIPPE 2016 Beijing oil show at 30 to 31, March. Most of us welcome clients from international to visit GN booth along with talk more business cohesiveness. If client miss CIPPE oil show , we also have OTC U . S . oil show in Could and Iran oil demonstrate in May. The client also can visit GN boot within USA or Iran that is certainly close to client. The equipment is practically same, we will take the large technology solids control devices to the exhibition and show the great product and talk much more business with clients coming from different countries.

CIPPF 2016

1) Decanter centrifuge

Decanter centrifuge is key equipment regarding solids control / drilling waste management. During CIPPE oil show, the centrifuge family will be there, such as baby centrifuge (9inch centrifuge), 14inch decanter centrifuge, 18inch decanter centrifuge and 22inch big bowl big capability decanter centrifuge. During NON-PRESCRIPTION and Iran oil present, only the 14inch jar centrifuge will be show right now there. Because this model centrifuge is among the most popular for solids control industry application.
2) Up and down cuttings dryer
Vertical cuttings dryer will likely be shown at CIPPE necessary oil show, Beijing and OVER-THE-COUNTER oil show, Houston. This particular vertical dryer is used intended for drilling waste management. The majority of client for this unit is usually from China, Iran, UAE, Nigeria, Algeria, etc . But undoubtedly, more and more countries will get the vertical cuttings dryer to obtain better protection for natural environment.
3) Shale shakers or maybe High G drying shakers
Shaker will be shown in CIPPE or OTC. The customer may compare the GN shaker advantages at the display compared with other brand shale shakers. We have many particular on the shaker and also shaker screens.
But if you want to examine more equipment, we advise client to CIPPE acrylic show which is only 40km far from GN factory. We all invite client visiting GN factory at the same time to know manufacturing and raw material along with GN production management and so forth

A New batch of Shaker Screens Arrive At The Warehouse

This week, a new big batch of Shaker Screens arrive at the warehouse of GN Solids America LLC. It will further meet the customers’ urgent need in North America.

Shaker Screen, as a wearing part of Shale Shaker, needs to be replaced regularly. As a top provider of complete line of solids control equipment and packaged mud system, Shaker Screens are also 1 of its mature products.

mud cleaner

The Shaker Screen that GN Solids Control manufactures do 1 of the 2 things:
1. Used on the shale shakers made by GN self;
2. Used on the Shakers from other brands, such as Derrick, Swaco;

In 2015, over 20,000 pcs of Replacement Screens were sold around the world. Please they are just the replacement shaker screens for the original ones from Derrick, Swaco, etc.

GN Solids America LLC was held in Houston in May, 2012. Until now it has been 3 years. The good location, convenient work condition, big warehouse, experienced salesmen and after-sales workers make GN Solids America LLC become more and more well known for the customers of North America. Lots of projects and cooperation have been received.

As compared with the solids control equipments manufactured by the companies in North America, the equipments of GN Solids Control have very dominant price advantage. Meanwhile, GN Solids Control has been putting high attention on the product quality since the first day it was held. Actually, GN’s products has already been well accepted by the customers from Middle East, Russia, Southeastern Asia, etc.

Now, Strategically more and more equipments and spare parts will be delivered to and stocked in the warehouse of GN Solids America LLC, it will further facilitate the North America’s customers in the future.

Finally, if you have any need with the products used for solids control and drilling waste management, welcome to visit our website or contact us at any time. You were promised that the good quality and competitive price will be provided.

Web:http://www.gnsolidsamerica.com
Email:usa@gnsolidscontrol.com

GN Decanter Centrifuge and Cuttings Dryer In Stock

GN Decanter Centrifuge and Cuttings Dryer In Stock
With the fast development of GN Solids America LLC, GN solids control and drilling waste management equipments are also started to stock in Houston warehouse. GN Solids America LLC is a USA based company, located in 6710 windfern road, Houston, TX 77040. Although GN Solids America LLC is still a new company, GN is getting to known by more and more local oil and gas companies.
GN Solids Control is the first API certified company from China, all of GN Solids Control and drilling waste management equipments are manufactured strictly according to API standard and comply with international standard which help to guarantee the quality of GN products. With these years upgrading and polishing, GN Solids Control and Drilling waste management equipments are getting better and better.GN Centrifuge and Cuttings Dryer
Now GN Solids Houston branch company GN Solids America LLC has may equipments in stock. Decanter centrifuges and cuttings dryers are both can be ship from Houston in a short period. GN Solids Houston company is mainly responsible for stocking equipments and providing after sales service. As GN professional engineers also working in GN Houston office, all of those decanter centrifuges and cuttings dryers will be tested thoroughly when we received them from China.
Besides those drilling waste management equipments, GN Solids America LLC also has many shakers and mud cleaners in stock. Series of spare parts of the decanter centrifuges, cuttings dryers and shakers are also stocking in Houston warehouse.
GN has a wide cooperation with many local companies, some of them are selling GN equipments to their customers. GN also has partners located in Canada and Mexico, which help to provide after sales service on behalf of GN Solids Control.
With the spare effort of GN leading designers, GN decanter centrifuges and cuttings dryers are largely improved every other year. Let’s take the centrifuge as an example, there are many large improvements between the first version of GN decanter centrifuge and the current C version centrifuge. C version centrifuge has a larger feeding capacity due to the feeding changing from small end to the large end. The opening on screw propeller also helps to improve the working efficiency if GN decanter centrifuge.

GN New Developed Decanter Centrifuge

GN New Developed Decanter Centrifuge
GN Solids Control manufactures over 300 sets decanter centrifuge every year. Most of the centrifuges are using in the overseas market, and only 30 percent decanter centrifuges are using in China. GN Solids Control equipments are successful to meet various customers’ demands for solids control and drilling waste management.
GN Solids Control provides many different centrifuges, such as 9 inch rotating bowl centrifuge for diamond drilling or mining, 14 inch and 18 inch for oil and gas slurry separation or industrial water dewatering, 22 inch rotating bowl for large volume separation.
This year, GN Solids Control provided one more compact decanter centrifuge with smaller supporting frame or stand for the centrifuge, which can be used for worksites without much large room.

gn cippe 2016 6
GN Solids Control engineers provide this newly developed decanter centrifuge which can transport easily for mobile treating systems. The working performance and products quality are still as good as the former large version.
Now GN Solids Control has the C version centrifuge. There are some important changes compare to the B version.
1. GN C version centrifuge is feeding from the large end rotating bowl, which helps to improve the feeding capacity largely.
2. The solids discharge port on the rotating bowl and liquid discharge port on the screw propeller are all protected with ceramic, which is much better for long time usage without wear.
3. GN also improved the screw propeller by make some openings on the screw propeller which helps to have a large separating capacity too.
GN Solids Control also provides modular decanter centrifuge treating unit, including decanter centrifuge, stand, screw pump and all the related pipes and accessories. This modular centrifuge can be used to equip with the current shaker or cuttings dryer in customer’s worksite conveniently. Customers can use this decanter centrifuge directly when some simple assembling work.
GN Solids America Houston office also provides modular unit for Hi-G shaker and Cuttings Dryer, for more info please feel free to contact us.