GN Solids Control provides standard and customized mud systems for No Dig Drilling areas. With these years’ fast development, GN Solids Control has provided hundreds of compact mud systems for HDD area.
GN Solids Control has 200GPM, 350GPM, 500 GPM and 1000PM mud system can be chose. Based on customer’s special demands, GN Solids Control also provides customized HDD mud recycling systems.

GN HDD mud treating systems are divided into two groups:
1. Economy Mud Recycling System: mud treating systems only have shakers and desander or desilters;
2. High Configuration Mud System: this type mud treating systems have storage tank and mixing tanks.
Today, we would like to give you an introduction based on the working process of GNMS-500GL high configuration mud system.
The main equipments in GNMS-500GL system including: shaker, mud cleaner (with desander and desilter cyclones) and mixing tank.
A submersible pump is usually used to pump the mud to the GN shaker, which is GNZS703E-DE with 3 panels’ shaker screens assembled on it. Drilling mud separated by the shaker will fall off to the bottom tank, which will be feed by one centrifugal pump to the 10inch desander cyclones for the next phase separation. Then the 4 inch desilter cyclones will help to remove much finer solids most of them are above 25mircons.

From the working function, the first shaker and mud cleaner tank is also called shaker tank, while for the rest part it is called mixing and storage tank. Clean drilling mud are stocking in the mixing tank, by adding some chemicals GN Solids Control mud systems provides effective drilling mud to the drilling rig. These drilling mud can be reused again.
All the above equipments can be put in one standard container, which will help to save shipping freight. As shaker screens are wearable parts when using in the shaker, GN Solids Control also manufactures the most cost effective shaker screens.