Oil sludge is a common problem in the oil and gas industry, which can cause significant environmental pollution if not treated properly. GN SOLIDS CONTROL, a leading manufacturer of solids control and waste management equipment, has developed the GNOST-15B oil sludge treatment equipment to address this issue.
The GNOST-15B is a powerful and efficient equipment designed to treat oil sludge by recovering oil, drying solids, and reducing environmental pollution. It is suitable for use in the Middle East and other regions where oil and gas exploration and production are prevalent.
The GNOST-15B is a compact and modular system that can be customized to meet the specific requirements of each customer. It consists of several modules, including a pre-mixing tank, a heating tank, a separation tank, a centrifuge, and a screw conveyor. The pre-mixing tank is used to mix the oil sludge with chemical agents to enhance the separation efficiency. The heating tank heats the mixture to a temperature that allows the oil to separate from the solids. The separation tank separates the oil, water, and solids using gravity separation. The centrifuge further separates the oil and solids, while the screw conveyor collects and discharges the dry solids.
The GNOST-15B is easy to operate, requires minimal maintenance, and has a low energy consumption. It can process up to 15 cubic meters of oil sludge per hour, with an oil recovery rate of up to 95%. The dried solids can be reused as fuel, reducing waste and saving costs.
GN SOLIDS CONTROL is committed to providing high-quality equipment and services to its customers. The GNOST-15B is backed by a comprehensive warranty and after-sales support, ensuring maximum uptime and customer satisfaction.
In conclusion, the GNOST-15B oil sludge treatment equipment is a reliable and efficient solution for oil and gas companies in the Middle East and other regions. It can help reduce environmental pollution, recover valuable resources, and save costs. Contact GN SOLIDS CONTROL for more information on how the GNOST-15B can benefit your business.
Solids and liquid separation are widely required in many industrious , such as the drilling project in oil gas industries. Drilling mud take the cutting from well, and also balance the pressure inside and outside well, protect rig machine and improve the drilling efficiency. It is very important to separate out the drilling cutting from drilling mud to guarantee the mud have good performance. Shale shaker is the core equipment to treat these kind mud.
The machine was driven by vibrator, and vibrating frequency can reach 1800 per minutes.The separation G force is about 7. There are similar equipment for mining industry, they utilize the same principle. but in mining industry ,we name this machine vibrating screen. Different with solids control industry, mining industry required large treating capacity, such as 200 cube meter per hour. we need to design the screen with small volume but big treating capacity. stack vibrating screen is special designed for requirement. Last week, we delivered one unit vibrating screen to mining company for iron ore. There are total 7 screen deck, all them use same vibrator. Every deck screen has the same treating capacity, when start the machine , all 7 screen will work together.
GN stack vibrating screen used carbon steel with bolt to connect different part, The connection is stronger than welding. Along with the machine work, the bolt connection will be more fasten. In some part where touch the material , we also paint special coating for anti abrasion. The angle of shaker deck is adjustable, which means, user can adjust the time that material stay on shaker deck. Higher angle means longer stay time, dryer solids. Lower angle, shorter treat time, and bigger treating capacity.
GN vibrating screen has lots different model, for classify, dewatering, welcome to contact us to get more info, we will be pleased to share our experience.
In the drilling equipment of oil gas industry. Solids control equipment is the most important accessory equipment for drilling mud treatment. Drilling mud can balance the pressure between the outside and inside of petroleum well, it is important to prevent blowout or well collapse, and also improve the drilling efficiency ,cooling the rig machine and protect it. Drilling mud is expensive and need to recycle to use. The main solids control equipment such as shale shaker can remove out the big size particle. But along with the mud be recycled more time, it will accumulate lots tiny particle. Shale shaker and mud cleaner are no way to remove out them. This time, we need to run Decanter centrifuge to separate out these tiny solids.
For this client, they required we provide screw conveyor to catch up the discharged solids from Decanter centrifuge. Transfer them to truck and delivery away. GNLW-363 Decanter centrifuge are the main model for drilling mud treatment. Whatever oil base drilling mud or oil base drilling mud, 363 model are no problem to treat them. We sold the GNLW-363 centrifuge more than 200 units every year. And this model served more than 2000 drilling project since company found time. 363 is 14 inch decanter centrifuge, the centrifuge bowl is 14 inch. It is just one model of GN centrifuge series. We can provide 9 inch, 22 inch, 30 inch Decanter for client different treating capacity requirement. The cone angle of centrifuge bowl are also vary. For different material or separation purpose, we will recommend the suitable cone angle to reach the separation purpose.
The centrifuge application of oil gas industry is just one. GN Decanter are also good performance on the waste water treatment, environment protection, metal recycling , or biological industry. If you have demand on this ,welcome to contact us for more information.
OTC is one of the biggest exhibition of the global for oil gas industry. Petrol exploration as the most important energy industry as the base of all economic activity. Every year OTC attracted almost all the top energy company of all over the world.
Actually oil gas industry include lots segment industry, from exploration to refinery. GN Solids Control is focused on the drilling mud treatment. In the petrol well drilling program which will need lots drilling mud to improve the work efficiency , and also protect the well and rid machine. This is the most important thing to guarantee the drilling work success.
Drilling mud is complex, expensive and also high pollution. Solids control equipment aimed to recycling drilling mud that returned from well and treat them for reuse. reduce the cost and environment pollution. GN Solids America LLC is branch of GN solids control, every year, we will participate this OTC show to display our equipment and communicate with customer about the technology each other. It is a good platform to find new sale opportunity and get the latest industry technology information. GN is open for new technology to improve efficiency and reduce cost for customer.
On this OTC show, GN Solids America LLC will display decanter centrifuge, shale shaker ,solids vacuum pump and also shaker screen. All these 3 products are widely used on solids control activity. Especially shale shaker, it is the core equipment for drilling mud treatment. Many our old client know GN shaker screen is high quality with good price. We will display new type shaker screen, which is better performance and longer life time than before. Solids vacuum pump is different with traditional pump, it is used to suck the high solids content material such as the drill cutting and oil sludge.
GN can provide the whole solution for solids control and waste management about well drilling. Hope to see you there.