Monthly Archives: October 2017

GN Poor Boy Degasser and Cuttings Boxes Delivered to Sinopec

GN Solids Control is a leading solids control and waste management equipment provider; customers are widely spread in more than 72 countries and regions. GN Solids Control has 2 manufacturing plants in China, now the global market is around 70% and the domestic market is around 30%.


Almost all the large oil and gas service providers and drilling rigs contractors are using GN Solids Control products in thousands of drilling rig sites. GN Solids Control has a very close relationship with most of the companies working on solids control and waste management area.
GN Solids Control has provided hundreds of shakers, decenter centrifuges and cuttings dryers to China oil companies. Just several weeks before, GN Solids Control delivered some poor boy degassers and cuttings boxes to Sinopec.
As we all know, Sinopec is one the largest oil companies in China, GN Solids Control has been providing solids control and waste management equipment for many years.
GN poor boy degasser is mainly used to eliminate large bubbles in the drilling fluid. GN poor boy degasser is composed by a large cylinder, one metal plate is fixed on top of the inner cylinder. Drilling fluid is hit on the baffle plate firmly so the large bubbles will run from the top of the cylinder. GN Solids Control also manufactures vacuum degasser and centrifugal degasser to eliminate finer bubbles. Centrifugal degasser takes narrow room which can be used various drilling rigs solids control systems.
Beside the poor boy degasser, GN Solids Control also provides some sets of cuttings boxes to Sinopec. GN Cuttings Boxes are mainly used to collect those drilling waste discharged from shaker, desander, desilter, decanter centrifuge and cuttings dryer. Level monitor is fixed on each cuttings box. In order to watch the leakage, some leaking devices are also fixed in the cutting box.

GN Oil Slurry Treating System

GN Solids Control has provided thousands of turn-key solutions to global customers. GN various separation treating equipment are widely used in solids and liquid separation, such as oil slurry treating, refinery plant slurry treating, oil tank bottom slurry treating.
This year, GN Solids Control has provided some sets oil slurry treating systems in Uganda, Kuwait, Canada and Qatar etc. GN Solids Control Oil Slurry treating systems are especially designed to treat high density and viscosity oil slurry: oil, water and solids can be separated out.
Solids discharged from GN oil slurry treating system only contains 1~2% oil; recovered oil only has less than 0.5% solids, while the recovered water is also less than 0.5% oil (by using gravity oil & water separator). If customer has higher demand on the recovered water, we also provide micro bubble oil & water separator. 20170704 Oil Sludge Treatment 2
GN Oil Slurry Treating System mainly includes the following treating components:
1. Pre-Mixing Tank
GN pre-mixing tank is used dilute the oil slurry by adding water and chemicals. Heating pipe around the tank is assembled in order to increase the liquidity. GN Solids also provides vacuum pump which can suck high density slurry from a mud pit within 10 m.
2. GN Coarse Shaker
GN coarse shaker is the first phase treating equipment, large solids are removed by choosing different size shaker screens, and sometimes opening mesh screens in stainless steel are also used. Here GN coarse shaker is covered with metal plate in order to keep the slurry from splashing. Flushing outlets also fixed on the shaker so screens don’t need to be disassembled for cleaning.
3. GN Decanter Centrifuge
Based on the treating volume, GN Solids provides 14inch centrifuge, 18inch centrifuge or 22inch centrifuge to treat different drilling slurry. 2 sets centrifuges may be used so solids can be removed twice.
4. GN 3 phase Separator
5. GN Flocculation Unit

20170704 Oil Sludge Treatment 3