With the acceleration of urbanization in Asia, non-excavation technology has been widely used in underground pipeline repair and installation. Among them, the mud water separation system and mud recovery system have become the key links. Recently, GN Solids Control company has successfully sold these two systems to non-excavation customers in Asia, marking a new breakthrough in the business of this field.

The mud water separation system plays a crucial role in non-excavation engineering. During pipeline repair and installation, large amounts of mud and wastewater are generated. These wastewaters contain a large amount of suspended solids, oils, and other impurities. If discharged directly without treatment, they will cause serious pollution to the environment. The mud water separation system can effectively separate solid particles, oils, and other impurities from the mud to meet discharge standards, protect the environment, and also comply with local government environmental requirements.

The application characteristics of mud water separation system

Efficient mud purification

The system can fully purify the mud, effectively control the mud’s performance indicators, and reduce drilling accidents to improve hole making quality.

Slurry recovery and utilization

The system can achieve slurry recovery and utilization, saving material costs for slurry preparation, while significantly reducing the transportation costs of waste mud and the cost of making mud.

Effective soil residue separation

The effective separation of soil residue by the equipment can improve hole making efficiency.

Environmental friendliness

The closed-loop purification method of mud and the low moisture content of residue reduce environmental impact.

Compact structural design

The system has a reasonable design，compact structure, small footprint, and has an anti-dry pump function, effectively extending the service life of the cyclone separator mud pump.

High-quality cyclone separators

The cyclone separators are made of polyurethane material with long service life, light weight, and easy maintenance.

Wide application range

It is suitable for mud protection wall, excavators, pile foundation engineering using cyclic drilling technology, diaphragm wall engineering, and mud water jacking engineering for mud purification and recovery.

In the future, GN Solids Control will continue to focus on the development trends of non-excavation technology, continuously innovate and improve our products and services, and provide more quality and environmentally friendly solutions to customers. At the same time, we also look forward to cooperating with more non-excavation customers in Asia to jointly promote the urbanization process and the development of non-excavation technology in Asia.

In the dynamic landscape of the mining industry, the demand for efficient and reliable equipment is paramount. Companies like GN Solids America are at the forefront of providing cutting-edge solutions, particularly in the realm of separation screens. One of their standout contributions to the mining sector is the development of large vibrating screens, revolutionizing the way materials are processed and enhancing overall operational efficiency.

Mining operations involve the extraction of valuable minerals from the earth, a process that relies heavily on sophisticated equipment to separate valuable resources from unwanted debris. This is where separation screens play a crucial role. GN Solids America has emerged as a key player in this arena, delivering innovative solutions that cater to the evolving needs of the industry.

The large vibrating screens developed by GN Solids America are designed to handle substantial volumes of material with precision. These screens are engineered to efficiently separate solids and liquids, ensuring that the extracted minerals meet the desired specifications. The robust construction of these screens enables them to withstand the harsh conditions commonly encountered in mining operations, contributing to increased durability and reduced downtime.

What sets GN Solids America apart is its commitment to technological advancements. The incorporation of state-of-the-art features in their separation screens, such as advanced vibration mechanisms and modular design, allows for customizable solutions that can adapt to diverse mining environments. This flexibility not only enhances performance but also contributes to a more sustainable and cost-effective mining process.

Furthermore, the emphasis on research and development at GN Solids America ensures that their equipment aligns with the latest industry trends, regulatory requirements, and environmental standards. The company’s dedication to continuous improvement positions them as a reliable partner for mining companies striving for operational excellence.

In conclusion, GN Solids America‘s contributions to the mining equipment sector, particularly in the development of large vibrating screens, underscore the importance of innovation in driving efficiency and sustainability in mining operations. As the industry continues to evolve, companies like GN Solids America play a pivotal role in shaping its future.

In the dynamic landscape of industries like oil and gas, where the extraction and processing of resources demand precision and efficiency, the role of solids control cannot be overstated. GN Solids America stands out as a key player in this arena, offering a Turnkey System that revolutionizes the way industries manage their solids control processes.

At the heart of GN Solids America‘s offering is its Turnkey System, a comprehensive solution designed to streamline the entire solids control process. From drilling to waste management, this system provides an end-to-end solution that ensures maximum efficiency and minimal environmental impact.

One of the standout features of GN Solids America‘s Turnkey System is its modular design. The system is customizable to fit the unique needs of each project, allowing for a tailored approach to solids control. This adaptability ensures that whether it’s a small-scale operation or a large-scale project, GN Solids America has the capability to deliver a system that aligns perfectly with the requirements.

The Turnkey System encompasses a range of equipment, including shale shakers, mud cleaners, decanter centrifuges, and more. Each component is engineered with precision and cutting-edge technology to deliver optimal performance. This holistic approach to solids control means that clients can rely on GN Solids America as a one-stop solution provider for all their needs.

The benefits of GN Solids America‘s Turnkey System extend beyond operational efficiency. The company’s commitment to environmental sustainability is evident in the design and functionality of its equipment. The system is equipped with advanced features that minimize waste generation and reduce the environmental footprint of solids control processes.

In conclusion, GN Solids America‘s Turnkey System emerges as a game-changer in the realm of solids control. Its modular design, cutting-edge technology, and commitment to environmental responsibility make it a top choice for industries seeking a comprehensive and efficient solution. With GN Solids America, clients can rest assured that they have a reliable partner for achieving excellence in solids control systems.

In the ever-evolving landscape of the oil and gas industry, innovation and efficiency go hand in hand. GN Solids America, a key player in this sector, has been at the forefront of introducing cutting-edge solutions to tackle the challenges of slurry management. Today, let’s explore the transformative impact of their mini desanders, mini desilters, and mini shale shakers on oil and gas operations.
Mini desanders and desilters are compact marvels designed to efficiently remove solid particles from slurry, enhancing the quality of drilling fluids and safeguarding equipment integrity. GN Solids America’s commitment to space efficiency and versatility is evident in these miniaturized solutions, which can be seamlessly integrated into various drilling setups.
The mini shale shaker, another innovation from GN Solids America, plays a pivotal role in the initial phase of slurry management. This vibrating sieve efficiently separates large particles from the drilling fluid, preventing abrasion and damage to downstream equipment. The result is a cleaner and more resilient drilling fluid ready for the next stages of the extraction process.
What sets GN Solids America apart is not just the compact design of their equipment but also the unwavering focus on performance. These miniaturized solutions boast high processing capacity, ensuring that even in limited space environments, the slurry separation process remains robust and efficient.
The advantages of integrating GN Solids America’s mini desanders, mini desilters, and mini shale shakers are multi-faceted. Improved separation efficiency translates to enhanced drilling performance, reduced equipment maintenance costs, and minimized downtime—a trifecta that significantly contributes to the bottom line of oil and gas operations.
As we celebrate our one-year milestone, let’s raise a toast to GN Solids America for driving innovation in slurry management. Their miniaturized solutions are not just changing the game; they are setting new standards for efficiency, reliability, and sustainability in the oil and gas sector. Cheers to a year of progress, and here’s to many more years of transformative advancements!

GN Solids America emerges as a leading provider of innovative solutions, particularly in the realm of centrifugal pumps and solids control equipment.

Centrifugal Pumps: The Heart of Solids Control
At the core of GN Solids America’s offerings is their high-performance centrifugal pumps. These pumps play a pivotal role in the solids control process by facilitating the separation of drilling mud and solids. The robust design and advanced technology incorporated into GN Solids America’s centrifugal pumps contribute to their reliability and effectiveness in handling diverse applications.

Cutting-Edge Solids Control Technology
GN Solids America is renowned for its commitment to cutting-edge technology in the solids control industry. Their centrifugal pumps are designed to efficiently process drilling fluids, removing unwanted solids and ensuring that the drilling mud meets the required specifications for reuse in the drilling process. This not only enhances operational efficiency but also minimizes waste, aligning with sustainability goals.

Versatility for Various Industries
One notable feature of GN Solids America’s centrifugal pumps is their versatility. These pumps are tailored to meet the demands of a wide range of industries beyond oil and gas, including mining, construction, and environmental projects. The adaptability of GN Solids America’s centrifugal pumps makes them a valuable asset for companies seeking reliable solids control solutions in diverse operational environments.

Customer-Centric Approach
GN Solids America distinguishes itself not only through its cutting-edge technology but also through its customer-centric approach. The company is dedicated to understanding the unique needs of its clients and providing tailored solutions. This commitment to customer satisfaction extends to the availability of products, ensuring that clients have timely access to the centrifugal pumps and solids control equipment they require.

Conclusion
In the ever-evolving landscape of solids control, GN Solids America stands out as a provider of top-tier centrifugal pumps and associated equipment. Their commitment to innovation, versatility, and customer satisfaction positions them as a reliable partner for industries seeking effective solids control solutions. As industries continue to face the challenges of efficient waste management and resource utilization, GN Solids America’s centrifugal pumps emerge as a beacon of reliability and efficiency in the realm of solids control.

In the realm of construction, managing slurry is a critical aspect that significantly influences project timelines, costs, and environmental impact. Traditional methods of slurry disposal often involve large volumes of water, leading to increased expenses and environmental concerns. However, the advent of advanced technologies, such as the GN Slurry Dewatering System, has revolutionized the construction industry by providing a comprehensive solids control solution.

At the heart of the GN Slurry Dewatering System lies its ability to efficiently separate solids from liquid, allowing for the recovery of valuable resources and the responsible disposal of waste. This system comprises several key components, each playing a crucial role in the overall solids control process.

The shale shaker is the initial line of defense, responsible for coarse screening and removing large particles from the slurry. Its high-capacity vibrating screens ensure efficient separation, preventing damage to downstream equipment and facilitating the dewatering process.

Following the shale shaker, the centrifuge takes center stage. This high-speed equipment employs centrifugal force to further separate solids from liquid, producing a drier, more manageable sludge. The centrifuge’s precision and speed contribute to the overall effectiveness of the system, ensuring the extraction of maximum solids from the slurry.

Pumps are the unsung heroes of the GN Slurry Dewatering System, facilitating the movement of slurry through the various stages of separation. Robust and reliable, these pumps play a pivotal role in maintaining a continuous workflow, enhancing the system’s efficiency.

The integration of these components results in a complete solids control system that not only minimizes environmental impact but also maximizes resource recovery. The reduction in water content in the slurry significantly decreases transportation costs for waste disposal, making the construction process more economical and sustainable.

In conclusion, the GN Slurry Dewatering System stands as a beacon of innovation in the construction industry, offering a complete solids control solution. By harnessing the power of shale shakers, centrifuges, and efficient pumps, construction projects can achieve enhanced efficiency, reduced costs, and a positive environmental footprint. Embracing such advanced technologies is not just a step forward; it’s a leap towards a more sustainable and responsible future in construction practices.

In the dynamic and ever-evolving field of drilling and waste management, Asian clients are turning to GN Solids Control for innovative solutions that meet their specific needs. Among the many cutting-edge products offered by GN Solids Control, the Vacuum Degasser stands out as a game-changer.

Asian clients involved in drilling operations often face the challenge of managing drilling mud efficiently. The Vacuum Degasser, manufactured by GN Solids Control, plays a crucial role in this process. It effectively removes gases, such as methane, hydrogen sulfide, and carbon dioxide, from the drilling mud, making it safer and more efficient for drilling operations.

The Vacuum Degasser offered by GN Solids Control is a robust and reliable piece of equipment. Its compact design and high-performance capability make it a valuable asset for Asian clients who are looking to optimize their drilling processes. It ensures the drilling mud is properly degassed, which not only enhances drilling efficiency but also reduces the risk of safety hazards associated with gas buildup in the mud.

GN Solids Control’s commitment to innovation and quality is evident in all their products, and the Vacuum Degasser is no exception. Asian clients who choose this solution can expect reduced downtime, increased drilling efficiency, and improved safety standards at their drilling sites.

Moreover, GN Solids Control offers comprehensive support and services to ensure that their Asian clients make the most of their investment. From installation and training to maintenance and troubleshooting, GN Solids Control’s dedicated team is always ready to assist.

In conclusion, Asian clients in the drilling and waste management industry are turning to GN Solids Control for state-of-the-art solutions like the Vacuum Degasser. This product not only helps streamline drilling operations but also ensures a safer working environment. With a commitment to innovation, quality, and excellent customer support, GN Solids Control is truly leading the way in waste management for Asian clients.

In the oil and gas industry, efficient drilling mud separation is crucial for smooth drilling operations. The GNLW363D-FHD decanter centrifuge is a game-changer in this field, offering a fully hydraulic drive system that ensures optimal performance and reliability.

Decanter centrifuges are vital in separating solids from drilling mud, a critical task in the drilling process. The GNLW363D-FHD stands out due to its fully hydraulic drive, providing numerous advantages. This advanced technology eliminates the need for belts and pulleys, resulting in reduced maintenance, lower operational costs, and increased operational uptime.

The fully hydraulic drive system in the GNLW363D-FHD allows for precise control over the centrifuge’s speed and torque, enabling operators to fine-tune the separation process according to the mud’s specific properties. This level of control is invaluable in achieving optimal solids separation and maintaining the desired mud properties.

Furthermore, the hydraulic drive system is known for its exceptional reliability. It reduces wear and tear on the machine’s components and extends the centrifuge’s lifespan. This means fewer downtime and maintenance-related costs, ensuring the drilling operation remains efficient and cost-effective.

The GNLW363D-FHD decanter centrifuge is designed to handle high flow rates, making it suitable for various drilling mud separation applications. Its robust construction and fully hydraulic drive enable it to perform in harsh drilling environments, maintaining its performance even under challenging conditions.

In conclusion, the GNLW363D-FHD decanter centrifuge with its fully hydraulic drive system represents a significant leap forward in drilling mud separation technology. It not only improves efficiency and reliability but also reduces operational costs, making it an excellent investment for companies in the oil and gas industry. By opting for this cutting-edge technology, drilling operations can maintain consistent mud properties and reduce environmental impact, all while improving the bottom line.

After 15 years of remarkable growth, GN Solids Control, a leading player in the field of solid-liquid separation technology and equipment, is taking a giant leap forward. The company’s relentless focus on innovation and manufacturing excellence has led to the need for a larger production base to meet the soaring demand and significantly reduce lead times.
The Existing Factory: A Story of Success and Growth

Since its inception, GN Solids Control has been committed to pushing the boundaries of solid-liquid separation technology. Over the past 15 years, they have steadily expanded their presence and product line to serve a multitude of industries. However, the company’s existing factory could no longer keep up with the burgeoning production needs, necessitating the move to a new, more expansive facility.
The New Factory: Meeting Demands and Enhancing Efficiency
The newly inaugurated production facility is a substantial step forward, covering an expansive area designed to support GN Solids Control’s ambitious growth. Equipped with state-of-the-art manufacturing technology and streamlined management practices, this modern factory ensures faster production cycles and consistently higher product quality.
Global Expansion: Bringing GN Closer to You

In addition to the new factory, GN Solids Control is strategically establishing subsidiary branches in major global markets to provide even more specialized and efficient services. These subsidiaries include GN SOLIDS AMERICA LLC, GN SOLIDS AUSTRALIA, and GN Russia. The primary objective behind this global expansion is to offer not only faster lead times but also enhanced technical support to clients worldwide.
Committed to Your Success
At the core of GN Solids Control’s mission is the unwavering commitment to delivering the most feasible and efficient solid-liquid separation solutions to their valued customers. The move to the new factory, coupled with a global presence, underlines the company’s dedication to ensuring environmental sustainability, operational efficiency, and customer satisfaction.
As GN Solids Control embarks on this exciting journey of expansion and innovation, the company is poised to remain at the forefront of the industry, setting new standards for excellence and performance. Your partnership with GN Solids Control promises to be an ever-evolving success story.

In a significant development for the drilling industry, a valued European client has received ATEX certified equipment from GN Solids Control. The equipment, featuring the model numbers GNZYQ1000A and GNZCQ270B, serves the vital purpose of gas removal from drilling fluids.
GNZYQ1000A, functioning as the primary gas separation device, plays a pivotal role in effectively eliminating gas contaminants from drilling mud. GNZCQ270B, employed post-vibrating screen processing, offers secondary gas separation, ensuring a comprehensive approach to gas removal.
The presence of gas contaminants in drilling fluids is known to significantly impact fluid density and overall performance. In some instances, these gases may contain flammable and toxic components, making their removal not only beneficial but a safety imperative for drilling operations.

One of the standout features of the GN Solids Control equipment is its ATEX certification. This certification ensures that the equipment complies with the strict safety standards outlined in the ATEX directive, a European regulatory framework designed to ensure safe operation in potentially explosive atmospheres where gas mixtures may be present.
The GNZYQ1000A and GNZCQ270B equipment models are engineered to meet the stringent safety and performance standards demanded by the European market, further underlining GN Solids Control’s commitment to delivering innovative and compliant solutions to its global clientele.
Beyond the ATEX certified Poorboy Degasser and Mud Gas Separator equipment, GN Solids Control excels in providing comprehensive drilling solids control equipment, including vibrating screens, centrifuges, agitators, desanders, mud guns, and more. The brand is synonymous with quality and reliability in the drilling industry.
GN Solids Control continues to assert itself as a trusted and innovative brand in the drilling industry. Their dedication to delivering high-quality, ATEX certified equipment showcases their commitment to ensuring the safety and success of drilling operations globally.
GN Solids Control is a leading provider of comprehensive solid-liquid separation solutions for the oil and gas industry. The company’s dedication to innovation, safety, and excellence is evident in its wide range of equipment designed to meet the evolving needs of the global drilling industry. GN Solids Control’s ATEX certified equipment is a testament to its commitment to providing state-of-the-art solutions for its clients.