Introduction

In the vast and ever-evolving landscape of the construction and oil & gas industries, reliable equipment is paramount to ensuring smooth operations and meeting the demanding challenges of remote and challenging environments. Recently, we, GN Solids Control, had the privilege of customizing and delivering five state-of-the-art trailer-mounted mud tanks to a prestigious client in the Middle East, catering to their unique operational requirements. This project not only showcases our expertise in manufacturing robust and versatile equipment but also underscores our commitment to exceeding client expectations.

The Challenge:

Our Middle Eastern client, renowned for their extensive operations in the energy sector, approached us with a specific set of requirements for mud tanks that would support their drilling activities in remote, desert-like conditions. They needed tanks that could withstand extreme temperatures, rough terrain, and continuous use while ensuring efficient mud circulation and storage. Moreover, the tanks had to be mobile, easily transportable, and quick to set up, allowing for seamless transitions between drilling sites.

Solution Crafted:

Understanding the unique challenges faced by our client, our engineering team embarked on designing and manufacturing five custom-built trailer-mounted mud tanks. Each tank was meticulously engineered to meet the following criteria:

Durability & Strength:

The tanks were constructed using high-grade steel alloy, ensuring exceptional resistance to corrosion, wear, and the harsh environmental conditions prevalent in the Middle East. Reinforced structures guaranteed structural integrity even under heavy loads and extreme stress.

Mobility & Versatility:

Mounted on heavy-duty trailers, the tanks featured robust suspension systems and easy-to-operate hydraulic leveling jacks, allowing for seamless transportation and quick setup at any location. The trailers were designed to navigate the uneven and challenging terrain common in desert environments.

Efficient Mud Circulation:

Equipped with advanced mud agitation and circulation systems, the tanks ensured uniform mixing and efficient mud flow, critical for maintaining drilling operations at peak performance.

Storage Capacity:

With generous storage capacities tailored to the client’s specific needs, these tanks could store sufficient mud for extended drilling sessions, minimizing the need for frequent refills.

Safety & Compliance:

All tanks were manufactured in compliance with international safety standards and regulations, ensuring the safety of personnel and equipment during operation.

Conclusion:

This project serves as a testament to GN’s capability to design and manufacture high-quality, custom-built equipment tailored to meet the unique demands of our clients worldwide. GN Solids Control takes pride in our ability to innovate and deliver solutions that make a tangible difference in the industries we serve. As we continue to expand our reach and portfolio, GN remain committed to delivering excellence, one project at a time.

In the ever-expanding landscape of the global oil and gas industry, innovative and reliable equipment play a pivotal role in ensuring efficient and safe extraction operations. Today, GN solids control is thrilled to announce a significant milestone achieved by our company with the successful shipment of state-of-the-art hydraulic centrifuges and cuttings dryers to esteemed Asian oilfield service companies. This landmark deal underscores our commitment to delivering cutting-edge technology tailored to meet the evolving needs of the region’s oil and gas sector.

Product Highlight: GNLW363D-FHD Hydraulic Centrifuges (6 Units)

At the heart of this shipment are six units of our flagship GNLW363D-FHD hydraulic centrifuges. These powerful machines are designed to tackle the toughest separation challenges in marine drilling environments. Boasting advanced hydraulic drive systems, the GNLW363D-FHDs efficiently separate drilling fluids from solids, minimizing waste and maximizing the reuse of drilling mud. Their rugged construction and precision engineering ensure consistent performance even under the most demanding conditions, making them the preferred choice for numerous oil and gas projects worldwide.

GNCD930G Cuttings Dryers (2 Units): Dry Efficiency, Boost Productivity

Complementing the centrifuges are two GNCD930G cuttings dryers, tailored to handle the drying and separation of drilling cuttings efficiently. These compact yet highly efficient units employ advanced technologies to quickly remove moisture from the cuttings, enhancing their recyclability and reducing disposal costs. The GNCD930Gs are known for their reliability, energy efficiency, and low maintenance requirements, making them an invaluable addition to any drilling fleet looking to optimize operational costs and enhance environmental sustainability.

Augmenting Support: 8 Screw Pumps

To ensure seamless integration and maximum efficiency, we have also included eight screw pumps in this shipment. These pumps are specifically selected for their ability to handle high-viscosity fluids with ease, ensuring a smooth flow of drilling mud and other process fluids throughout the system. Their durability and versatility make them ideal companions for the GNLW363D-FHD centrifuges and GNCD930G cuttings dryers, enhancing overall system performance and reducing downtime.

Strengthening Ties with Asian Markets

This transaction marks a significant strengthening of our presence in the Asian oil and gas market, where we have consistently demonstrated our dedication to providing innovative solutions tailored to the unique challenges faced by local operators. By supplying these high-performance products, we aim to contribute to the sustainable growth of the region’s oil and gas sector, fostering stronger partnerships and mutual success.

Conclusion

In conclusion, the shipment of six GNLW363D-FHD hydraulic centrifuges, two GNCD930G cuttings dryers, and eight screw pumps to Asian oilfield service companies underscores our commitment to delivering exceptional value to our customers. GN is proud to be a trusted partner in the oil and gas industry, providing reliable equipment that helps drive operational efficiency, reduce costs, and protect the environment. As we continue to navigate the global landscape, we look forward to collaborating with more companies across Asia and beyond, driving innovation and excellence in the oil and gas sector.

At GN Solids Control, we’re proud to announce that our latest batch of screw conveyors is nearing completion in their assembly phase. This milestone not only represents the culmination of meticulous planning, precision manufacturing, and rigorous testing but also underscores our commitment to delivering innovative and reliable material handling solutions to industries worldwide.

The GN Solids Control Advantage

As a leading provider of solids control equipment and solutions, GN Solids Control has built a reputation for excellence through our dedication to quality, innovation, and customer satisfaction. Our screw conveyors are no exception, designed and manufactured to meet the most demanding requirements of the food processing, mining, construction, and other industries.

From Design to Delivery

Our journey to bring these screw conveyors to life began with careful planning and design. Our engineering team worked closely with clients to understand their unique needs and developed a solution that would seamlessly integrate into their material handling systems. From the robust steel tubing that forms the frame to the precision-cut spiral blades, every component was crafted with the highest standards of quality and durability in mind.

Precision Manufacturing and Assembly

The manufacturing and assembly processes at GN Solids Control are a testament to our commitment to precision and attention to detail. Our skilled technicians work tirelessly to ensure that every nut and bolt is tightened to perfection, and every component fits seamlessly into place. Rigorous quality control checks at every stage of the process ensure that only the finest materials and craftsmanship make it into our final products.

Testing & Quality Assurance

Before these screw conveyors leave our facility, they undergo a series of rigorous tests to ensure their reliability and durability. From load capacity tests to endurance runs, our quality assurance team leaves no stone unturned in their quest for excellence. We’re confident that every conveyor we ship meets or exceeds our stringent standards, ensuring that our clients receive the highest quality equipment available.

Empowering Industries Worldwide

With this batch of screw conveyors nearing completion, we’re eager to see them deployed in various industries around the globe. From food processing plants to mining operations, these machines will play a pivotal role in boosting productivity, streamlining material handling processes, and reducing downtime.

A Commitment to Innovation

At GN Solids Control, we’re driven by a relentless commitment to innovation. As we celebrate this milestone, we’re already looking ahead, exploring new technologies and design concepts that will push the boundaries of what’s possible in material handling. We’re proud of what we’ve achieved so far and are excited about the future of our industry and the countless ways we can continue to empower our clients with efficient, reliable, and cost-effective solutions.

Thank you for your continued support and trust in GN Solids Control. We look forward to continuing to serve you with the highest quality equipment and services available.

Introduction

Amidst the rapid evolution of the Asian oil and gas services market, efficient and reliable equipment has emerged as a pivotal force driving industry progress. GN Solids Control, a prominent player in this field, has consistently committed to technological innovation and product optimization to meet the ever-changing market demands. Recently, we proudly announce the successful sale of our newly developed 22-inch large bowl centrifuge, the GNLW553D-VFD, to a leading Asian oil and gas service company. This milestone signifies yet another significant breakthrough in advancing separation technology within the oilfield services industry.

Company Introduction: GN Solids Control

Since its inception, GN Solids Control has specialized in the design, manufacturing, and sales of solids control equipment, dedicated to providing world-class technical solutions for global oil and gas exploration, production, and environmental engineering sectors. Our research and development team, comprised of industry experts, continually translates the latest scientific achievements into practical applications, driving technological advancements and industrial upgrades within the oilfield services industry. Adhering to the principles of quality first and customer foremost, GN Solids Control has garnered widespread market recognition and praise for its superior product performance and comprehensive after-sales services.

Product Highlights: GNLW553D-VFD Large Bowl Centrifuge

Ultra-Large Capacity Design:

The GNLW553D-VFD features a 22-inch oversized diameter bowl, significantly enhancing its single-pass processing capacity. Ideal for handling high-flow, high-solids content oil-water mixtures, it effectively shortens processing cycles and boosts overall operational efficiency.

Variable Frequency Drive Technology (VFD):

Integrated with an advanced VFD system, the centrifuge automatically adjusts its rotational speed and torque based on actual operating conditions, optimizing energy consumption. This feature not only reduces operational costs but also enhances the equipment’s adaptability and stability, ensuring efficient performance across various complex environments.

High-Efficiency Separation Performance:

Through precisely designed flow channels and separation structures, the GNLW553D-VFD achieves exceptional separation of oil, water, and solid impurities, with a separation accuracy exceeding 99%. This ensures oil purity and recovery rates, mitigating subsequent processing difficulties and costs.

Intelligent Control System:

Equipped with an advanced PLC control system and touch screen interface, the centrifuge enables remote monitoring and fault diagnosis, simplifying operational procedures, minimizing manual intervention, and enhancing operational safety and reliability.

Durable Materials and Corrosion-Resistant Design:

Considering the harsh working environments in the oil and gas industry, the GNLW553D-VFD is manufactured with high-strength corrosion-resistant materials. Critical components undergo special treatments, ensuring the equipment maintains exceptional performance and stability over extended periods of use.

III. Application Advantages: Empowering Asia’s Oilfield Services Industry

Enhanced Operational Efficiency:

With its large capacity and high separation capabilities, the GNLW553D-VFD becomes the ideal choice for rapid on-site processing of oil-water mixtures in oilfields, effectively shortening production cycles and elevating overall operational efficiency.

Cost Reduction:

The VFD technology optimizes energy consumption, while the high separation accuracy reduces subsequent processing costs, significantly saving operational expenses for oilfield service companies.

Environmental Friendliness:

The centrifuge’s efficient separation performance minimizes the generation of wastewater and solid waste, aligning with current environmental regulations and enhancing oilfield service companies’ social responsibility and brand image.

Enhanced Market Competitiveness:

Equipped with advanced technology, the GNLW553D-VFD centrifuge provides oilfield service companies with more efficient and reliable solutions, bolstering their competitiveness in the fiercely competitive Asian oil and gas services market.

Conclusion

The successful sale of the GNLW553D-VFD large bowl centrifuge marks another milestone in GN Solids Control’s technological innovation and market expansion. We firmly believe that through continuous technological development and product optimization, GN Solids Control will continue to bring more surprises and breakthroughs to the oil and gas services industry in Asia and globally. We look forward to collaborating with more partners to jointly create a brilliant future for the oil and gas industry!

At GN Solids Control, we pride ourselves on being at the forefront of the oil and gas industry, providing innovative and reliable solutions to our clients worldwide. Recently, we successfully exported our advanced oil well servicing rig solids control system to African customers, marking a significant milestone in our commitment to supporting Africa’s energy development and growth.

I. GN Solids Control: A Name Synonymous with Excellence

Founded on a foundation of technical expertise and a relentless pursuit of excellence, GN Solids Control has established itself as a leading provider of solids control systems and related equipment for the oil and gas industry. With a focus on research and development, we continuously innovate to bring cutting-edge solutions that meet the evolving needs of our clients.

II. Leading Technology, Tailored for Africa’s Challenges

Understanding the unique challenges posed by Africa’s diverse geological conditions, GN Solids Control’s solids control system is designed to thrive in even the most demanding environments. Our systems integrate the latest technologies, including high-efficiency shale shakers, desanders, desilters, and centrifuges, ensuring optimal performance and reliability. We also offer customized solutions that are tailored to the specific requirements of each African customer, ensuring seamless integration into their existing operations.

III. Environmental Stewardship, A Core Value

At GN Solids Control, we believe that responsible energy development goes hand in hand with environmental protection. Our solids control systems are designed with eco-friendly principles in mind, minimizing waste and reducing the environmental footprint of drilling operations. We are committed to helping our African customers achieve sustainable energy development, ensuring that their operations contribute positively to the environment and local communities.

IV. Comprehensive Support, from Start to Finish

From the initial consultation to installation, commissioning, and ongoing maintenance, GN Solids Control provides comprehensive support to our African customers. Our team of experienced engineers and technicians is dedicated to ensuring that our systems perform optimally and meet our clients’ expectations. We also offer training programs to help our customers’ personnel operate and maintain the systems effectively, ensuring their long-term success.

V. A Shared Vision for Africa’s Energy Future

The successful export of our oil well servicing rig solids control system to African customers is a testament to GN Solids Control‘s commitment to supporting Africa’s energy development. We are excited to be a part of this journey and look forward to continuing to work closely with our African partners to build a brighter, more sustainable energy future for the continent.

At GN Solids Control, we are proud to be a trusted partner in Africa’s energy sector, and we are committed to delivering innovative solutions that empower our customers and contribute to the growth and prosperity of the region.

In today’s world of ever-growing global energy demands, drilling technology stands as a pivotal link in oil and gas exploration and development. The efficiency, safety, and environmental friendliness of drilling operations have become focal points of industry attention. Against this backdrop, GN Solids Control Technology, with its remarkable innovation capabilities and superior product quality, has successfully propelled its vacuum degasser into the international market, garnering widespread favor and trust from numerous foreign drilling companies.

GN Solids Control Vacuum Degasser and Vacuum Pump: A Technological Game-Changer for Enhanced Drilling Efficiency

As a crucial component of the drilling mud treatment system, the GN Solids Control Vacuum Degasser and vacuum pump employs advanced vacuum separation technology to efficiently eliminate gases and tiny solid particles from drilling fluids, ensuring the cleanliness and stability of the mud. This technology application not only significantly boosts drilling efficiency and reduces the failure rate during drilling but also generates notable economic benefits by minimizing mud loss and energy consumption.

With its outstanding performance stability and durability, the GN Solids Control Vacuum Degasser stands out in the international arena. Its design meticulously considers diverse geological conditions and drilling process requirements, enabling it to adapt to various complex operating scenarios. Furthermore, GN Solids Control Technology provides comprehensive after-sales service and technical support, ensuring prompt and professional assistance throughout the customer’s usage journey.

Vacuum Degasser: A Dedicated Device for Processing Gas-Invaded Drilling Fluids

Also known as a negative pressure degasser, the vacuum degasser is a specialized equipment used in the drilling fluid mud solids control system. Its primary function is to create a negative pressure zone within the vacuum tank through a vacuum pump, effectively removing gases from the drilling fluid, restoring mud weight, stabilizing mud viscosity, and ultimately reducing drilling costs. Below is a detailed introduction to the vacuum degasser:

Working Principle

The vacuum degasser leverages the suction effect of the vacuum pump to establish a negative pressure zone within the vacuum tank. Driven by atmospheric pressure, mud enters the hollow shaft of the rotor through the suction pipe and is then ejected in a jet-like manner towards the tank walls through windows around the hollow shaft. Upon collision with the separation wheel, the drilling fluid is separated into thin layers, shattering bubbles embedded in the mud and releasing the trapped gases. Subsequently, the vacuum pump extracts and the gas-water separator separates the gases, which are expelled through the separator’s exhaust pipe to a safe area, while the mud is discharged from the tank by the impeller.

Structural Characteristics

Vacuum Pump and Gas-Water Separator: The vacuum pump serves a dual purpose, drawing mud into the vacuum tank and extracting gases from it. The gas-water separator ensures that water and gas are not expelled simultaneously, maintaining the exhaust pipe’s unobstructed flow.

Efficient Degassing: The high-speed projection of mud through the rotor windows against the walls thoroughly shatters bubbles within the mud, achieving exceptional degassing results.

Stable and Reliable: Operating in an isothermal state, the water-ring vacuum pump is suitable for the extraction of flammable and explosive gases, ensuring reliable safety performance.

Rational Design: The offset design of the main motor lowers the overall center of gravity, while the adoption of belt transmission avoids the complexity of reduction mechanisms.

Application Fields

Beyond the drilling industry, the vacuum degasser is widely used in vacuum degassing processes across various sectors, including ceramics, plastic toys, resin crafts, candles, printer cartridges, and glass products. In these fields, it significantly enhances product surface density and gloss.

GN Solids Control Technology: A Powerful Force in the International Drilling Market

Since its inception, GN Solids Control Technology has consistently dedicated itself to the research and innovation of drilling equipment. Leveraging its robust technical prowess and keen market insights, it continuously introduces high-quality products tailored to market demands. Today, GN Solids Control Vacuum Degassers have successfully penetrated markets in numerous countries and regions, becoming a highly regarded brand in the international drilling arena.

Looking ahead, GN Solids Control Technology will adhere to its development philosophy of “Innovation, Excellence, and Win-Win Cooperation,” continually increasing R&D investments, enhancing product performance and service standards, and contributing significantly to the sustainable and healthy development of the global drilling industry. Additionally, GN Solids Control Technology anticipates establishing long-term stable partnerships with more international drilling companies to jointly propel advancements and progress in drilling technology.

Amidst the global spotlight on environmental protection technologies, GN Solid Control (hereinafter referred to as “GN”) has once again emerged as a leader, triumphantly announcing the successful sale of its Oil Sludge Minimization System to clients in South America. This achievement marks a pivotal moment in the company’s commitment to promoting sustainable environmental solutions worldwide.

Pioneering Technology for Environmental Stewardship

GN, renowned for its expertise in solids control and mud treatment, has dedicated significant resources to developing innovative solutions for oil sludge management. The Oil Sludge Minimization System, a culmination of cutting-edge physical, chemical, and biological processes, effectively reduces sludge volumes while eliminating oil and hazardous contaminants. This system not only mitigates environmental risks but also fosters resource recovery and circular economy practices.

Bridging Continents for Green Partnerships

The successful export to South America underscores GN’s robust international presence and commitment to global collaboration. Through extensive consultations and market analysis, GN and its South American partners forged a strong bond, overcoming linguistic, cultural, and technical barriers to create a tailored solution for the region’s unique challenges. This partnership embodies a shared vision for environmental sustainability and underscores the power of cross-border cooperation.

Transforming Challenges into Opportunities

The implementation of GN’s Oil Sludge Minimization System in South America promises substantial environmental benefits. By minimizing waste, reducing land usage, and mitigating pollution, the system contributes to a cleaner, healthier environment. Additionally, it facilitates the recovery of valuable resources, promoting economic growth through sustainable practices. This transformative technology addresses the pressing needs of the energy sector while aligning with international environmental commitments.

Driving Innovation for a Greener Future

GN remains steadfast in its pursuit of innovation and environmental excellence. We are committed to continually refining our technologies, enhancing service offerings, and fostering collaborations that advance global environmental protection. As we look ahead, we envision a world where our solutions contribute to a more sustainable future, fostering harmony between economic development and environmental preservation.

Conclusion

The successful sale of GN Solid Control’s Oil Sludge Minimization System to South American clients is a testament to our company’s dedication to developing and deploying innovative environmental technologies. We are proud to have partnered with forward-thinking clients who share our vision for a greener, more sustainable planet. Together, we will continue to drive progress in environmental stewardship, ensuring a brighter future for all.

Recently, GN Solids Control, a leading domestic manufacturer of solid control equipment, announced the successful delivery of two sets of 500GPM (approximately 113.6m³/h) mud recovery systems to clients in Argentina. This transaction not only underscores GN Solid Control‘s robust competitiveness in the international market but also further consolidates the company’s leading position in the fields of trenchless construction and drilling mud treatment.

Project Background

With the continuous advancement of global infrastructure construction, trenchless technologies and drilling operations have been widely applied in emerging market countries such as Argentina. These projects have imposed higher demands on mud treatment equipment, requiring both efficient processing capabilities and environmentally friendly solutions. GN Solid Control, with its advanced technology and rich experience, has successfully won the favor of Argentinean clients.

System Overview

GN Solid Control’s mud recovery system is specifically designed to handle mud generated during drilling and trenchless construction processes. Through a series of advanced mechanical structures and processes, the system purifies, separates, and recovers mud, enabling multiple reuses, reducing construction costs, and meeting environmental protection requirements.

System Composition

GN Solid Control‘s mud recovery system typically comprises the following main components:

Vibrating Screen:

As the first step in mud purification, the vibrating screen separates large solid particles from the mud through high-frequency vibrations. Made of high-quality materials, GN Solid Control‘s vibrating screens are wear-resistant, corrosion-resistant, and capable of stable long-term operation.

Desander:

After passing through the vibrating screen, the mud enters the desander, where sand and other medium-sized solid particles are further separated through hydrocyclone separation principles. The efficient operation of the desander significantly improves mud cleanliness.

Centrifuge:

As one of the core components, the centrifuge separates tiny solid particles from the liquid phase through centrifugal force generated by high-speed rotation. GN Solid Control‘s centrifuges are precision-machined with CNC equipment and undergo multiple dynamic balancing treatments to ensure stable operation at high speeds.

Electrical Control System:

The electrical control system automates and monitors the entire mud recovery system. Employing renowned electrical components (e.g., Siemens or Schneider), GN Solid Control‘s system is explosion-proof, weatherproof, and dustproof, ensuring reliable operation in harsh environments.

Other Auxiliary Equipment:

Including jet mixing devices, mud storage tanks, pumps, etc., these devices collaborate to complete mud recovery, preparation, and transportation tasks.

System Features

High-Efficiency Processing:

GN Solid Control’s mud recovery system boasts powerful processing capabilities, quickly separating solid particles from mud, enhancing recovery and reuse rates.

Environmental Protection and Energy Saving:

The system adopts advanced purification processes and energy-saving designs, reducing waste discharge and energy consumption, in line with environmental regulations.

Ease of Operation and Maintenance:

The modular design ensures a compact structure and straightforward operation. GN Solid Control provides comprehensive technical support and after-sales services, ensuring timely and professional assistance during use.

Customized Services:

GN Solid Control also offers customized mud recovery systems tailored to clients’ specific needs, meeting unique project requirements.

Application Areas

GN Solid Control‘s mud recovery systems are widely used in various fields, including oil drilling, trenchless horizontal directional drilling, coalbed methane drilling, large, medium, and small-scale shield tunneling projects, water and geothermal wells, mining exploration, and more. Their efficiency, environmental friendliness, and ease of operation have earned recognition and praise from numerous clients.

In conclusion, GN Solid Control‘s mud recovery system is an efficient, environmentally friendly, and user-friendly mud treatment solution with broad application prospects across multiple industries.

With the rapid development of the global chemical industry, the demand for efficient and stable solid-liquid separation equipment is increasing. GN Solid Control, a leader in the field of solid-liquid separation, has achieved remarkable success with its GNLW364 horizontal decanter centrifuge in overseas crystallized salt dehydration projects, making it a valuable asset to these endeavors.

Project Background

Crystallized salt dehydration is an essential process in the chemical industry, crucial for improving product quality and reducing production costs. In recent years, with the continuous expansion of overseas markets, the demand for crystallized salt dehydration equipment has become increasingly urgent. Leveraging its rich industry experience and advanced technological capabilities, GN Solid Control has successfully applied the GNLW364 horizontal decanter centrifuge to overseas crystallized salt dehydration projects.

Equipment Overview

The GNLW364 horizontal decanter centrifuge is one of GN Solid Control’s star products, boasting high efficiency, stability, and environmental friendliness. Utilizing advanced centrifugal separation technology, this equipment effectively separates solid-liquid mixtures, achieving the purpose of crystallized salt dehydration. Meanwhile, its unique design and superior materials ensure stable operation under harsh environments such as high temperatures and humidity.

 Technical Features

Excellent Material Quality:

The GNLW364 horizontal decanter centrifuge‘s bowl is made of SS2205 duplex stainless steel through centrifugal casting. The screw conveyor is also made of stainless steel, with carbide alloy inserts in the solid-phase contact area to enhance wear resistance. The discharge port is equipped with a tungsten carbide alloy sleeve to ensure wear resistance and prolong service life.

Advanced Drive System:

It adopts a fully hydraulic drive system supported by a well-known brand of centrifuge hydraulic drive systems. This system utilizes a motor to drive the oil pump, forming two oil circuits to drive the hydraulic motor and hydraulic differential, ensuring stable operation of the equipment even under high-temperature conditions.

Intelligent Control System:

The centrifuge control box is equipped with a PLC control system and an HDMI human-computer interaction interface. Operators can intuitively view various operating parameters of the centrifuge and quickly modify them at the operating terminal to achieve the desired separation effect. All electrical components in the electrical control box are from internationally renowned brands.

Application Effects

In overseas crystallized salt dehydration projects, the GNLW364 horizontal decanter centrifuge has demonstrated outstanding performance. Its efficient separation capabilities and stable operation have received high recognition from customers. Additionally, GN Solid Control provides comprehensive technical support and after-sales service, ensuring the smooth progress of the project.

Conclusion

The successful application of GN Solid Control’s GNLW364 horizontal decanter centrifuge in overseas crystallized salt dehydration projects once again proves its leading position in the field of solid-liquid separation. In the future, GN Solid Control will continue to uphold the philosophy of quality first and customer foremost, continuously innovating and developing to provide global customers with even better products and services.

I. Project Background

With the acceleration of urbanization globally, the issue of municipal sludge treatment has become increasingly prominent. To address this challenge, an overseas municipal sludge dewatering project has adopted the GNLW364 sludge dewatering centrifuge, produced by GN Solids Control.

II. Company Information: GN Solids Control

1. Company Profile

• Founded in 2007, GN Solids Control is a leading manufacturer of separation equipment, specializing in the design, production, and sales of industrial decanter centrifuges, drilling solids control equipment, waste disposal equipment, and vibration screens.
• Headquartered in Dachang Chaobai River Industrial Park, Langfang, Hebei Province, China, GN Solids Control has a registered capital of 55 million yuan.
• 70% of the company’s products are exported to over 60 countries and regions worldwide, including the United States, Australia, the Middle East, Russia, Europe, and Southeast Asia.

2. Certifications and Standards

• GN Solids Control has obtained certifications such as EU CE, environmental safety HSE, Russian TRCU, and is the domestic manufacturer with the most consecutive API certifications for solids control equipment.
• The company is committed to the innovation and research of drilling mud solids control equipment and drilling waste slurry treatment equipment.

3. International Presence

• GN Solids Control has established branches in Moscow, Russia, and Houston, Texas, USA, with an office and workshop area of 3,000 square meters.
• The company has also established cooperative branches in Australia, Egypt, Algeria, Argentina, Iran, and Tunisia, forming a well-known solid control brand – GN Solids Control.

III. Equipment Introduction

1. Model and Quantity

• Model: GNLW364 sludge dewatering centrifuge
• Quantity: 3 units

2. Technical Parameters

• Single-unit treatment capacity: 35m³/h
• Design critical speed: 3900RPM
• Regular speed range: 0-3200RPM
• Critical separation factor: 3063G
• Particle diameter of separation: 2-5μm
• Differential torque: 3500N.M
• Main motor power: 37KW

3. Design Features and Advantages

• The drum material is duplex stainless steel SS2305, outperforming industry standards.
• The centrifugal casting process ensures a uniform drum texture and excellent dynamic balancing performance.
• The slag outlet and spiral feed outlet are embedded with tungsten carbide hard alloy sleeves for high wear resistance.
• The spiral feeder is inlaid with wear-resistant alloy sheets, ensuring long service life and reducing maintenance frequency.
• PLC control panel for real-time monitoring of equipment status.

IV. Application Scenarios

The GNLW364 sludge dewatering centrifuge is widely applicable in urban sewage treatment plants, industrial wastewater treatment plants, and other facilities. Its efficient dewatering capability can effectively reduce sludge volume, lower moisture content, and facilitate subsequent treatment and disposal.

V. Project Benefits

1. Enhanced Dewatering Efficiency

• Utilizing advanced centrifugal dewatering technology, the GNLW364 sludge dewatering centrifuge can rapidly remove water from sludge, improving dewatering efficiency.

2. Environmental Protection and Energy Conservation

• No chemical additives are required during the dewatering process, minimizing environmental pollution.
• The equipment consumes low energy, contributing to energy conservation and emission reduction.

3. Easy Operation

• The automated control system simplifies equipment operation, reducing labor costs.

4. Strong Adaptability

• The equipment is suitable for treating different types of sludge, demonstrating strong adaptability.

VI. Conclusion

By employing the GNLW364 sludge dewatering centrifuge from GN Solids Control, this overseas municipal sludge dewatering project has achieved efficient, environmentally friendly, and energy-saving sludge treatment goals, making positive contributions to improving local environmental quality and promoting sustainable urban development.